Aastra Telecom 41-001343-02 manual Examples for Models with 3-Line LCDs

		Operational Features
Examples for Models with 3-Line LCDs
Server	Park Configuration	Pickup Configuration
Asterisk	prgkeyN type: park	prgkeyN type: pickup
	sip lineN park pickup config: 70;70;asterisk	sip lineN park pickup config: 70;70;asterisk
Sylantro	prgkeyN type: park	prgkeyN type: pickup
	sip lineN park pickup config: *98;*99;sylantro	sip lineN park pickup config: *98;*99;sylantro
BroadWorks	prgkeyN type: park	prgkeyN type: pickup
	sip lineN park pickup config: *68;*88;broadworks	sip lineN park pickup config: *68;*88;broadworks
ININ PBX	prgkeyN type: park	prgkeyN type: pickup
	sip lineN park pickup config: callpark;pickup;inin	sip lineN park pickup config: callpark;pickup;inin

Note:

The 6730i, 6731i, 6735i, 6737i, 6753i, 6755i, 6863i, 6865i and 9143i do not allow for the configuration of labels and states for programmable keys.

Call Park/Pickup Configuration Precedence Rule

For users upgrading from Release 2.x firmware, the "softkeyN value" parameter will be used if the "sip lineN park pickup config" parameter is not set. If the per-line park pickup config parameter is set, the following precedence rule will apply:

1."sip lineN park pickup config: <park_value>;<pickup_value>;<asterisk sylantro broadworks>" will override

"sip park pickup config: <park_value>; <pickup_value>; <asterisk sylantro broadworks inin>"

2."sip park pickup config: <park_value>;<pickup_value>;<asterisk sylantro broadworks inin>" will override

"softkeyN value: <park_or_pickup_value>" (or topsoftkeyN, prgkeyN, or expmod1 keyN).

3."softkeyN value: <asterisksylantrobroadworksinin>;<park_or_pickup_value>" will have lowest priority.

For example, the following has been configured on the phone:

softkey1 type: park

softkey1 label: parkCall

softkey1 states: connected

softkey1 value: broadworks;*68

softkey2 type: pickup

softkey2 label: pickupCall

softkey2 states: idle, outgoing

softkey2 value: broadworks;*88

sip park pickup config: 70;70;asterisk

sip line1 park pickup config: *78;*98;broadworks

If the active call is using Line1, the phone will use the BroadWorks method for park (*78) and pickup (*98) since per-line has the highest precedence.

If the active call is using any other line except Line1, the phone will use the Asterisk method for park (70) and pickup (70) since it has precedence over the softkey value.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section,

“” on page A-184, “Softkey Settings” on page A-158and “Programmable Key Settings” on page A-166.

41-001343-02 REV04 – 05.2014 5-183