Aastra Telecom 41-001343-02 Ring Tone Per-Line Settings, LineN is applicable to lines 1 through

Operational, Basic, and Advanced Parameters

Ring Tone Per-Line Settings

Parameter –	Configuration Files
lineN ring tone	aastra.cfg, <model>.cfg, <mac>.cfg
(N is a line number from 1 to 9)
Description	Sets the type of ring tone on the IP phone on a per-line basis. Ring tone can be set to one
	of six distinct rings.

	Note:
	LineN is applicable to lines 1 through 9.
Format	Integer
Default Value	-1 (Global)
Range	-1 (Global)
	0	(Tone 1)
	1	(Tone 2)
	2	(Tone 3)
	3	(Tone 4)
	4	(Tone 5)
	5	(Silent)
Example	line1 ring tone: 3

Ring Tone via Speaker During Active Calls Settings

Parameter –	Configuration Files
ring audibly enable	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Enables/disables the feature whereby the ring tone of an incoming call is played through
	the IP phone’s speaker if a user is on an active call or in the process of dialing out.
	Notes:
	•	Feature compatibility is dependant on the IP phone model (see Ring Tone via Speaker
		During Active Calls on page 5-90for more information).
	•	This feature is not supported when utilizing the headset audio mode.
	•	With this feature enabled and when the phone’s speaker is playing the incoming call’s
		ring tone, call-waiting tones will not be played.
Format	Boolean
Default Value	0 (disabled)
Range	0-1
	0 (disabled)
	1 (enabled)
Example	ring audibly enable: 1

A-121 41-001343-02 REV04 – 05.2014