Start-up and use
Oven structure
The Openspace oven has a capacity of 70 litres and offers users the option of cooking on 4 shelves at the same time or cooking large quantities which would not necessarily be possible in a traditional oven.
Thanks to the ExtraLarge Space, Openspace offers 10 cooking functions, 6 of which are universal and suitable for any type of cooking, while the remaining 4 are automatic programmes which can be used to achieve perfect results for any recipe.
ExtraLarge Space: cooking on 4 shelf levels
RACK
RACK
RACK
DRIPPING PAN
!The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half and hour. Make sure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away.
!To make the setting process easier, press and hold the + and – buttons to scroll through the numbers on the display rapidly.
!Each setting will automatically be stored in the appliance memory after 10 seconds.
Some models are equipped with a system of hinges which allows the door to close slowly, without the user having to follow the movement through with his/ her hand. To use the system correctly, before closing the door:
•Open the door fully.
•Do not force the closing movement manually.
!The touch controls cannot be activated if the user is wearing gloves.
Control panel lock
! The control panel can be locked while the oven is | AUS | |
| ||
off, once cooking has started or finished and during |
| |
programming. |
|
|
To lock the oven controls, press and hold the |
| |
button for at least 2 seconds. A buzzer sounds and |
| |
the display shows the key symbol |
| |
icon, when lit, indicate lock function activation. |
| |
To deactivate the lock, press and hold the |
| |
button again for at least 2 seconds. |
| |
Setting the clock |
| |
! The clock can only be set when the oven is |
| |
switched off. If the oven is in standby mode, |
| |
pressing the | button once will display the current |
|
time setting. Press it again to set the time. |
| |
After connection to the power supply network or after |
| |
a blackout, the | button and the digits on the |
|
display will flash for 10 seconds. To set the clock:
1.Press button .
2.Turn the TIMER knob towards “+” and
3.Once you have reached the correct hour value,
press the button.
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the
clock. If the icon flashes on the display, this indicates that the clock has not been set correctly.
Setting the minute minder
!The minute minder may be set regardless of whether the oven is switched on or off. It does not switch the oven on or off.
When the set time has elapsed, the minute minder emits a buzzer that will automatically stop after 30 seconds or when any active button on the control panel is pressed.
To adjust the minute minder, proceed as follows:
1.Press button .
2.Adjust the time as desired by turning the TIMER knob towards “+” and
3.Once you have reached the desired value, press
the button again.
The lit symbol will remind you that the minute
5