Installation
! Before placing your new appliance into operation
AUS | please read these operating instructions carefully. If |
| |
| the appliance is sold, given away or moved, please |
| make sure the booklet is also passed on to the new |
| owners so that they may benefit from the advice |
| contained within it. |
| ! Please keep these operating instructions for future |
| reference. it contains important information on |
| installation, operation and safety. |
| Positioning |
| ! Keep packaging material out of the reach of |
| children. It can become a choking or suffocation |
| hazard. (see Precautions and tips). |
| ! The appliance must be installed by a qualified |
| person in compliance with the instructions provided. |
| Incorrect installation may damage property or cause |
Ventilation |
. | 45 | mm | . |
mm |
| ||
560 |
|
|
|
To ensure good ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see figures).
min. 20 mm |
FAN ASSISTED |
MODE |
min. 45 mm |
harm to people or animals. | |
Use the appropriate cabinet to ensure that the | |
appliance functions properly. | |
• | The panels adjacent to the oven must be made of |
| |
• | Cabinets with a veneer exterior must be |
| assembled with glues which can withstand |
| temperatures of up to 100°C. |
• | To install the oven under the counter (see |
| diagram) or in a kitchen unit, the cabinet must |
| have the following dimensions: |
Centring and fixing
Secure the appliance to the cabinet:
•Open the oven door.
•Remove the 2 rubber plugs covering the fixing holes on the perimeter frame.
•Fix the oven to the cabinet using the 2 wood screws.
•Replace the rubber plugs.
597 mm.
595 | mm. |
|
20 mm. |
|
570 mm. |
|
| . |
mm | |
550 | . |
mm | |
| .* |
20,5 mm | |
22,5 |
|
| . |
|
mm |
| |
550 . |
| |
min |
| |
| . |
|
mm |
| |
45 |
|
|
558 | mm. | min. |
| ||
|
|
!All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.
* Stainless steel models only
!The appliance must not come into contact with electrical parts once it has been installed.
The indications for consumption given on the data plate have been calculated for this type of installation.
2