Installation
FixingInstallationPlate
The wall you select should be strong and solid enough to prevent vibration
1.Mount the installation plate on the wall with type "A" screws. If mounting the unit on a concrete wall, use anchor bolts.
•Mount the installation plate horizontally by aligning the centerline using a level.
Installation Plate |
Chassis |
Hook |
Type "A" screw |
ENGLISH
2.Measure the wall and mark the centerline. It is also important to use caution concerning the location of the installation
CHASSIS |
| Distance mm(in) |
| ||
(Grade) |
|
|
|
| |
A | B | C | D | ||
| |||||
SD | 120(4.7) | 110(4.3) | 43(1.7) | 43(1.7) | |
|
|
|
|
|
C |
| D |
A | Installation plate | B |
Left rear piping |
| Right rear piping |
3.Install after removing one of the indicated cutting phase according to the installation location of the indoor unit's piping.
Cutting Phase
DrillaHoleintheWall
•Drill the piping hole with a ø70mm(2.76in) hole core drill. Drill the piping hole at either the right or the left with the hole slightly slanted to the outdoor side.
| WALL |
|
Indoor | Outdoor | |
| (3/16"~5/16") |
Installation Manual 13