Installation
Select
the
best
Location
Indoor unit
1.Do not have any heat or steam near the unit.
2.Select a place where there are no obstacles in front of the unit.
3.Make sure that condensation drainage can be conveniently routed away.
4.Do not install near a doorway.
5.Ensure that the interval between a wall and the left (or right) of the unit is more than 10cm(3.9in). The unit should be installed as high as possible on the wall, allowing a minimum of 20cm(7.9in) from ceiling.
More than |
|
10cm(3.9in) | More than |
| |
| 20cm(7.9in) |
| More than |
| 10cm(3.9in) |
More than |
|
2.3m(7.6ft) |
|
ENGLISH
6.Use a stud finder to locate studs to prevent unnecessary damage to the wall.
Install the indoor unit on the wall where the height from the floor is more than 2.3 meters(7.6ft). A minimum pipe run of 7.5 meters(24.6ft) is required to minimize vibration & excessive noise
Outdoor unit
1.If an awning is built over the unit to prevent direct sunlight or rain exposure, make sure that heat radiation from the condenser is not restricted.
2.Ensure that the space around the back and sides is more than 30cm(11.8in). The front of the unit should have more than 70cm(27.6in) of space.
3.Do not place animals and plants in the path of the warm air.
4.Take the weight of the air conditioner into account and select a place where noise and vibration are minimum.
5.Select a place where the warm air and noise from the air conditioner do not disturb neighbors.
More than 60cm(23.6in)
More than
More than30cm(11.8in) 30cm(11.8in)
More than | More than |
70cm(27.6in) | 60cm(23.6in) |
Installation Manual 11
