Installation
Outdoor
1.Remove the cover control from the unit by loosening the screw.
Connect the wires to the terminals on the control board individually as the following.
2.Secure the cable onto the control board with the holder (clamper).
3.Refix the cover control to the original position with the screw.
Wiring Diagram
Outdoor unit |
|
Terminal block |
|
Over 5mm |
|
(0.2") | Conduit panel |
Power supply |
|
cord | Connecting |
| |
| cable |
Cover control |
|
NOTICE
1.Separately wire power supply cord and connecting cable.
2.Use
3.Use outdoor and waterproof connection cable rated more than 300V for the connection between indoor and outdoor unit. (For example, Type
•Be sure to comply with local codes while running the wire from the indoor unit to the outdoor unit(size of wire and wiring method, etc).
•Every wire must be connected firmly.
•No wire should be allowed to touch refrigerant tubing, the compressor or any moving parts.
22Room Air Conditioner
