Aastra Telecom 41-001343-02 manual MAC Address/Line Number in Register Messages

Advanced Operational Features

In addition to configuring the phone with TR-069, you can also do the following:

•Reboot the phone

•Reset to factory defaults

•Update the firmware of the device

•Backup/restore configuration

•Upload the log file

Reference

For more information about TR-069, see the Aastra TR-069 Configuration Guide.

MAC Address/Line Number in REGISTER Messages

The IP phones can send the MAC address and line number in the REGISTER packets making it easier for the call server when a user configures the phones via the Aastra Web UI or the IP Phone UI. The following two configurable headers send this information to the call server:

Aastra-Mac: <mac address>

Aastra-Line: <line number>

The MAC address is sent in uppercase hex numbers, for example, 00085D03C792. The line number is a number between 1 and 9.

The following parameters allow you to enable/disable the sending of MAC address and line number to the call server:

•sip send mac

•sip send line

These parameters are disabled by default. The parameters are configurable via the configuration files or the Aastra Web UI.

Configuring the MAC address/Line Number in REGISTER Message

Configuration Files

For specific parameters you can set in the configuration files for enabling/disabling MAC address and line number, see Appendix A, the section, Advanced Operational Parameters on page A-205.

41-001343-02 REV04 – 05.2014 6-5