Aastra Telecom 41-001343-02 manual Configuring Type of Service ToS/DSCP optional, Sip Rtp Rtcp

Network Settings

The following table shows the DSCP range/VLAN priority mapping:

DSCP Range	VLAN Priority
0-7	0
8-15	1
16-23	2
24-31	3
32-39	4
40-47	5
48-55	6
56-63	7

The following table identifies the default DSCP values for the protocols:

Protocol Name	Default DSCP Values in the ToS Field
sip	26
rtp	46
rtcp	46

Configuring Type of Service (ToS)/DSCP (optional)

Use the following procedures to configure ToS/DSCP on the IP phone.

Note:

ToS/DSCP is enabled by default. The SIP, RTP, and RTCP parameters show defaults of 26, 46, and 46, respectively. Use the following procedures to change these settings if required.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Type of Service (ToS)/DSCP Settings” on page A-39.

IP Phone UI

1.	on the phone to enter the Options List.
Press

2.Select Administrator Menu.

3.Enter your Administrator password.

Note:

The IP Phones accept numeric passwords only.

4.Select Network Settings.

5.Select Type of Service DSCP.

6.Select Type of Service SIP. or

Select Type of Service RTP. or

Select Type of Service RTCP.

41-001343-02 REV04 – 05.2014 4-43