![The sensors are](/images/new-backgrounds/65561/65561105x1.webp)
|
| Problem solving guide |
|
|
|
|
|
|
Problem | Possible cause | Remedy |
The sensors are | The sensitivity level of | Make sure that there is no direct |
| the sensors has | light (from the sun or from an |
not react at all. | changed. | artificial source) falling onto the |
|
| hob and that the surrounding |
|
| area is not too dark. |
|
| Make sure that there is nothing |
|
| covering the sensors or the hob. |
|
| Take any pans off the hob and |
|
| wipe away any food deposits. |
|
| Interrupt the power supply to the |
|
| hob for approx. 1 minute. |
|
| If this does not solve the |
|
| problem, please call the Miele |
|
| Service department. |
|
|
|
FE flashes alternately |
|
|
with numbers in the |
|
|
timer display. |
|
|
FE 44 |
|
|
The overheating | See "Overheating protection". | |
| protection |
|
| mechanism has |
|
| triggered. |
|
FE 47 |
|
|
The fan is either | Make sure it has not been | |
FE 48 | blocked or faulty. | blocked by something like a |
| fork. Remove the cause of the | |
|
| |
|
| blockage. If the fault message |
|
| appears again, call the Miele |
|
| Service Department. |
|
|
|
Other fault messages | There is an electronic | Interrupt the power supply to the |
FE.. | fault. | hob for approx. 1 minute. |
|
| If the problem persists after |
|
| reconnecting the appliance to |
|
| the power supply, please |
|
| contact the Miele Service |
|
| department. |
|
|
|
53