Problem solving guide
With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation can be put right without contacting the Service Department.
Installation work and repairs to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Do not attempt to open the casing of the appliance. Repairs and other work by unqualified persons could be dangerous and Miele cannot be held liable for unauthorised work.
Problem | Possible cause | Remedy |
The hob or cooking | The mains fuse has tripped. | Reset the trip switch in the |
zones cannot be |
| mains fuse box (minimum |
switched on. |
| fuse rating - see data |
|
| plate). |
|
|
|
| There may be a technical | Disconnect the appliance |
| fault. | from the electricity supply |
|
| for approx. 1 minute. To do |
|
| this: |
|
| – switch off at the isolator, |
|
| or |
|
| – disconnect the mains |
|
| fuse. |
|
| Reset the trip switch in the |
|
| mains fuse box, and switch |
|
| the appliance back on. If it |
|
| still will not switch on, |
|
| contact a qualified |
|
| electrician or the Miele Ser- |
|
| vice Department. |
|
|
|
50
