Miele KM6323, KM6347, KM6348 Granite and marble worktops, Flush-fitted hobs, Preparing the worktop

Models: KM6322 KM6348 KM6347 KM6323

1 80
Download 80 pages 11.03 Kb
Page 72
Image 72
Granite and marble worktops

Flush-fitted hobs

Granite and marble worktops

Preparing the worktop

￿Worktop

￿Hob

￿Gap

As the ceramic glass and the worktop cut-out have a certain dimensional tolerance, the size of gap ￿ can vary (min. 1 mm).

￿Make the worktop cut-out as shown in "Building-in dimensions". Observe the safety distances (see "Safety instructions for installation").

Connecting the mains cable to the appliance

The mains cable must only be connected to the appliance by a qualified and competent electrician in strict accordance with current local and national safety regulations (BS 7671 in the UK).

￿Follow the instructions in the wiring diagram (see "Electrical connection - Wiring diagram").

Installing the hob

￿Feed the mains connection cable down through the cut-out.

￿Centre the hob ￿ in the cut-out.

￿Connect the hob to the mains.

￿Check that the hob works.

￿Seal the remaining gap ￿ with a silicone sealant that is heat-resistant to at least 160 °C.

For granite and marble worktops, only use silicone sealant that is especially formulated for granite and marble, and observe the sealant manufacturer's instructions.

72

Page 72
Image 72
Miele KM6323, KM6347, KM6348 Granite and marble worktops, Flush-fitted hobs, Preparing the worktop, Installing the hob