Conctivity and Mielehome
Signing on the hob
If you want to sign the hob
–on to the Mielehome system, first prepare the signing on procedure on the master appliance (see the "Mielehome" fitting and installation instructions)
–on to the Conctivity system, first sign on the cooker hood (see the "Conctivity" fitting and installation instructions).
With the hob switched off, touch the and sensors at the same time until the safety lock indicator light flashes.
After selecting programming mode, P (Programme) and S (Status) will appear in the timer display. On hobs with 3 cooking zones, an additional indicator will appear at the rear left.
Touch the sensor for selecting the front left cooking zone and then touch the 1 on the numerical keypad (Set Programme 10).
Touch the sensor for selecting the front right cooking zone and then touch the 2 on the numerical keypad (Set Status 2 = Signed on).
The
To save the setting, touch the sensor until all the displays go out.
Proceed as described in the "Mielehome" or Conctivity fitting and installation instructions.
58