Installing the hob
Flush fit hobs are only suitable for installation in granite, marble, tiled or solid wood worktops.
When using a worktop made from any other material, please check first with the worktop manufacturer that it is suitable for installing a flush fit hob.
Certain models are suitable for building into glass worktops - please see advice under
The internal width of the base unit must be at least as wide as the internal
If the underside of the hob is not freely accessible after installation, any sealant used to plug the gaps around the appliance must be removed to enable the hob to be lifted out of the
The hob can be installed
–in a suitable
–in a suitable
71