Miele KM6347 Solid wood, tiled and glass worktops, Flush-fitted hobs, Preparing the worktop

Flush-fitted hobs

Solid wood, tiled and glass worktops

Preparing the worktop

￿Worktop

￿Hob

￿Gap

￿Wooden frame 13 mm (to be provided on site)

As the ceramic glass and the worktop cut-out have a certain dimensional tolerance, the size of gap ￿ can vary (min. 1 mm).

￿Make the worktop cut-out as shown in "Building-in dimensions". Observe the safety distances (see "Safety instructions for installation").

￿Fix the wooden frame ￿ 7 mm below the top edge of the worktop (see diagram).

Connecting the mains cable to the appliance

The mains cable must only be connected to the appliance by a qualified and competent electrician in strict accordance with current local and national safety regulations (BS 7671 in the UK).

￿Follow the instructions in the wiring diagram (see "Electrical connection - Wiring diagram").

Installing the hob

￿Feed the mains connection cable down through the cut-out.

￿Centre the hob ￿ in the cut-out.

￿Connect the hob to the mains.

￿Check that the hob works.

￿Seal the remaining gap ￿ with a silicone sealant that is heat-resistant to at least 160 °C.

Observe the silicone sealant manufacturer's instructions.

For granite and marble tiles, only use silicone sealant that has been especially formulated for granite and marble.

73