Aastra Telecom 41-001343-02 manual Port protocol to setup a call, Server

Operational, Basic, and Advanced Parameters

Parameter –	Configuration Files
sips local certificate	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Allows you to specify the Local Certificate file to use when the phone uses the TLS trans-
	port protocol to setup a call.
	This parameter is required when configuring TLS (optional for Persistent TLS.)
	You can use this parameter in three ways:
	• To download no certificates
	• To download a certificate from the original configuration server
	• To download a certificate from another specified server
	To download a specific file, the string value MUST HAVE A FILENAME at the end of the
	string. For example:
	sips local certificate:ftp://admin:admin!@1.2.3.4:50/path/phonesLocalCert.pem
	where “path” is the directory and “phonesLocalCert.pem” is the filename. If you do not
	specify a filename, the download fails.
	See examples for each below.
	Note:
	The certificate file must use the format “.pem”. To create specific certificate files to use on
	your IP phone, contact Aastra Technical Support.
Format	<filename>.pem
Default Value	Not Applicable
Range	Not Applicable
Example	The following example downloads no local certificate file:
	sips local certificate:
	The following example downloads the local certificate file from the original configuration
	server.
	sips local certificate: phonesLocalCert.pem
	The following example uses FTP to download the firmware file “phonesLocalCert.pem”
	(local certificate file) from the “path” directory on server 1.2.3.4 using port 50:
	sips local certificate: ftp://admin:admin!@1.2.3.4:50/path/phonesLocalCert.pem

A-91 41-001343-02 REV04 – 05.2014