Aastra Telecom 41-001343-02 manual Click on Advanced Settings-Network-VLAN

Network Settings

IP Phone UI

11.In the PC Port VLAN > PC Port VLAN ID field, enter a value from 1 to 4095 to specify the VLAN ID for the LAN Port. Default is 4095.

Note:

Setting the PC Port VLAN ID to 4095 and LAN Port VLAN ID to any ID from 1 to 4094 will allow frames from the LAN port (containing a VLAN ID) to be untagged before being forwarded to the PC port and frames from the PC port (without a VLAN ID) to be tagged with the configured VLAN ID before being forwarded to the LAN port.

Example:

You enable tagging on the phone port as normal but set the PC Port VLAN ID to 4095 and the LAN Port VLAN ID to any ID from 1 to 4094. The following example sets the LAN port to be on VLAN 3 but the PC port is configured as untagged.

VLAN Settings->VLAN: Enable

VLAN Settings->LAN Port VLAN->LAN Port VLAN ID: 3

VLAN Settings->PC Port VLAN->PC Port VLAN ID: 4095

12.In the PC Port VLAN > Priority field, enter a value from 0 to 7 to specify the PC Port VLAN priority. Default is 0.

13.Press the Save softkey.

14.Restart the phone for the selection to take affect.

Aastra Web UI

1.Click on Advanced Settings->Network->VLAN.

To globally enable/disable VLAN and set priority for non-IP packets:

2.Enable VLAN by checking the VLAN Enable field check box. (Disable this field by unchecking the check box).

3.With VLAN enabled, select the priority (0 to 7) for non-IP packets in the Priority, Non-IP Packet field.

4.Enable or disable VLAN HPQ by checking or unchecking the HPQ Enable field check box.

4-50 41-001343-02 REV04 – 05.2014