Aastra Telecom 41-001343-02 manual LAN Port Ethernet Port 0 Parameters, Tos priority map 26,7

Operational, Basic, and Advanced Parameters

LAN Port (Ethernet Port 0) Parameters

Parameter –	Configuration Files
vlan id	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Allows you to configure a VLAN ID that associates with the physical Ethernet Port 0 (LAN
	port).
	Notes:
	• Setting the “vlan id” to 4095 and “vlan id port 1” to any ID from 1 to 4094 will allow
	frames from the PC port (containing a VLAN ID) to be untagged before being forwarded
	to the LAN port and frames from the LAN port (without a VLAN ID) to be tagged with the
	configured VLAN ID before being forwarded to the PC port.
	Example:
	You enable tagging on the phone port as normal but set the “vlan id” to 4095 and the
	“vlan id port 1” to any ID from 1 to 4094. The following example sets the PC port to be on
	VLAN 3 but the LAN port is configured as untagged:
	tagging enabled: 1
	vlan id: 4095
	vlan id port 1: 3
	• Alternatively setting the “vlan id” to any ID from 1 to 4094 and “vlan id port 1” to 4095
	will allow frames from the LAN port (containing a VLAN ID) to be untagged before being
	forwarded to the PC port and frames from the PC port (without a VLAN ID) to be tagged
	with the configured VLAN ID before being forwarded to the LAN port.
Format	Integer
Default Value	1
Range	1 to 4095
Example	vlan id: 300
Parameter –	Configuration Files
tos priority map	aastra.cfg, <model>.cfg, <mac>.cfg
Description	This parameter is based on the Type of Service (ToS), Differentiated Services Code Point
	(DSCP) setting for SIP (tos sip parameter), RTP (tos rtp parameter) and RTCP (tos rtcp
	parameter). It is the mapping between the DSCP value and the VLAN priority value for SIP,
	RTP, and RTCP packets.
	You enter the tos priority map value as follows:
	(DSCP_1,Priority_1)(DSCP_2,Priority_2).....(DSCP_64,Priority_64)
	where the DSCP value range is 0-63 and the priority range is 0-7. Mappings not enclosed in
	parentheses and separated with a comma, or with values outside the ranges, are ignored.
Format	Integer
Default Value	3 (based on the default ToS DSCP SIP setting of 26)
	5 (based on the default ToS DSCP RTP setting of 46)
	5 (based on the default ToS DSCP RTCP setting of 46)
Range	0 to 63 (for DSCP)
	0 to 7 (for SIP, RTP, and RTCP priorities)
Example	tos priority map: (26,7)

A-35 41-001343-02 REV04 – 05.2014