Aastra Telecom 41-001343-02 manual SoftkeyN ring splash

Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters

Parameter–	Configuration Files
softkeyN ring splash	aastra.cfg, <model>.cfg, <mac>.cfg
Description	When a key is configured for BLF functionality, this parameter controls the ring splash
	alert pattern per key. The following alerting patterns are available:
	• 0: Silence (ring splash off).
	• 1: Normal (same as current BLF ring splash).
	• 2: Normal delayed (After a delay of [x] seconds, the ring signal that is the same as the
	current BLF ring splash is played [use the “ring splash delay” parameter to define
	the delay]).
	• 3: Periodic (similar to the normal ring signal that is used by the phone itself. The
	actual ring melody is based on the current melody set for the line to which the BLF
	key is associated [use the “ring splash frequency” parameter to define the fre-
	quency interval).
	• 4: Periodic delayed (same as Periodic but after a delay of [x] seconds, the ring signal
	that is used by the phone is played [use the “ring splash frequency” parameter to
	define the frequency interval and the “ring splash delay” parameter to define the
	delay]).
	• 5: Low volume (same as the current BLF ring splash but at a lower level to be less
	intrusive).
	• 6: Low volume delayed (after a delay of [x] seconds, the ring signal that is the same as
	the current BLF ring splash is played at a lower level [use the “ring splash delay”
	parameter to define the delay]).
	• 7: The behavior is determined by the global parameter “play a ring splash”.
	– If “play a ring splash” is defined as 0 then the feature is disabled.
	– If “play a ring splash” is defined as 1 then the behavior is the same as Normal.
	– If “play a ring splash” is defined as 2 then the behavior is the same as Normal but
	the ring splash plays when idle and also during the active call state.
	• 8: In call delayed (same as Normal delayed but ring splash plays when idle and also
	during the active call state [use the “ring splash delay” parameter to define the
	delay]).
	• 9: In call periodic (same as Periodic but ring splash plays when idle and also during
	the active call state [use the “ring splash frequency” parameter to define the fre-
	quency interval).
	• 10: In call periodic delayed (same as Periodic delayed but ring splash plays when idle
	and also during the active call state [use the “ring splash frequency” parameter to
	define the frequency interval and the “ring splash delay” parameter to define the
	delay]).
	• 11: In call low volume (same as Low volume but ring splash plays when idle and also
	during the active call state).
	• 12: In call low volume delayed (same as Low volume delayed but ring splash plays
	when idle and also during the active call state [use the “ring splash delay” param-
	eter to define the delay]).
	Notes:
	• Ring tones are based on the current ring tone set configured on the IP phone.
	• BLF alerting patterns 7 - 11 are applicable to the 6739i, 6755i, 6757i, and 6757i CT IP
	phones only.

When a key is configured for BLF/List functionality, this parameter controls the ring tone per key. The following ring tones are available:

•Ring tone 1

•Ring tone 2

•Ring tone 3

•Ring tone 4

•Ring tone 5

•Silence (ring tone off)

Note:

Ring tones are based on the current ring tone set configured on the IP phone.

Format	Integer
Default value	For BLF	For BLF/List
	0 (Silence)	100 (Ring tone 1)

41-001343-02 REV04 – 05.2014 A-196