Aastra Telecom 41-001343-02 manual This option can be set by both Users and Administrators

Administrator Level Options

Parameter in	Parameter in Configuration	Description
Aastra Web UI	Files
XML Beep Support	xml beep notification	Enables or disables the playing of a beep to indicate a status on the phone. When the
		phone receives a status message, the BEEP notifies the user that the message is dis-
Note:		playing.
This option can be set by both		For more information on this feature, see “XML Beep Support” on page 5-62.
Users and Administrators.
Status Scroll Delay (seconds)	xml status scroll delay	Allows you to set the time delay, in seconds, between the scrolling of each status
		message on the phone.
Note:		For more information on this feature, see “Status Scroll Delay” on page 5-63.
This option can be set by both
Users and Administrators.
Switch UI Focus to Ringing	switch focus to ringing line	Enables or disables whether or not the UI focus is switched to a ringing line while the
Line		phone is in the connected state.
Note:		For more information on this feature, see “Switch Focus to Ringing Line” on page 5-
This option can be set by both		64.
Users and Administrators.
Call Hold Reminder During	call hold reminder during	Enables or disables the ability for the phone to initiate a continuous reminder tone
Active Calls	active calls	on the active call when another call is on hold. When this feature is disabled, a ring
		splash is heard when the active call hangs up and there is still a call on hold.
Note:

This option can be set by both Users and Administrators.

For more information on this feature, see “Call Hold Reminder During Active Calls” on page 5-65.

Call Hold Reminder call hold reminder

Note:

This option can be set by both

Users and Administrators.

Enables or disables the reminder ring splash timer to start as soon as you put a call on hold (even when no other calls are active on the phone). When enabled, the phone initiates a reminder ring splash periodically for the single call on hold. When disabled, no reminder ring splash is audible.

For more information on this feature, see “Call Hold Reminder (on Single Hold)” on page 5-66.

call hold reminder timer	Specifies the time delay, in seconds, that a ring splash is heard on an active call when
	another call was placed on hold. For example, if a call comes into Line 1, and then a
Note:	call comes into Line 2 and you answer Line 2, Line 1 is automatically placed on hold.
	While on the active Line 2, after 7 seconds, a ring splash audio sounds on the line
This option can be set by an
	reminding you that the call on Line 1 is still on hold. This timer begins to increment
Administrator only.
	after Line 2 is answered.
	Notes:
	• This parameter is used with the “call hold reminder frequency” parameter.
	• You must enable this “call hold reminder timer” parameter for it to work.
	• A value of “0” disables the call hold reminder feature.
	For more information on this feature, see “Call Hold Reminder Timer & Frequency” on
	page 5-67.
call hold reminder frequency	Specifies the time interval, in seconds, between each ring splash sound on the active
	line. For example, if a call comes into Line 1, and then a call comes into Line 2 and you

Note:	answer Line 2, Line 1 is automatically placed on hold. While on the active Line 2, after
	7 seconds, a ring splash audio sounds on the line reminding you that the call on Line
This option can be set by an
	1 is still on hold (determined by the “call hold reminder timer” parameter), and then
Administrator only.
	the ring splash is heard again after 60 seconds (determined by this parameter).

Notes:

•You must enable the “call hold reminder” and/or “call hold reminder during active calls” parameter(s), and the “call hold reminder timer” parameter, for this parameter to work.

•A value of “0” prevents additional rings.

For more information on this feature, see “Call Hold Reminder Timer & Frequency” on page 5-67.

3-17 41-001343-02 REV04 – 05.2014