Model 8100 Energy Recovery Ventilator
Installation Instructions
Safety Instructions
WARNING
1.Risk of property damage, injury or death. Installation, service, and maintenance must be performed by a qualified service technician.
2.120 Volts may cause serious injury from electric shock. Disconnect electrical power before starting installation or servicing. Leave power disconnected until installation/service is completed.
3.The unit must be mounted in an upright position. Do not mount the unit with the access door facing down.
4.Sharp edges may cause serious injury from cuts. Use care when cutting plenum openings and handling duct work.
5.Inhalation of toxic gases or fumes can be harmful. The fresh air intake must be mounted in a location removed from sources of dangerous toxic gases. All ducting must be separate from other household exhaust systems.
6.Insufficient combustion air may cause toxic conditions. The unit must not exhaust air from an enclosed room with combustion appliances.
7.Excess negative or positive pressure may cause health problems or structural damage. The airflow must be balanced after installation.
8.Dropping may cause personal injury or equipment damage. Handle with care and follow installation instructions.
CAUTION
1.Read all instructions before beginning installation.
2.The installation must conform to all applicable codes.
3.The fresh air duct from outside and to the house and the stale air duct from the unit to the outside must be fully insulated to prevent condensation from forming on the duct work.
Table of Contents
Safety Instructions | 1 | Balancing the System | . 8 | |
Specifications | 2 | Equipment Required | . 8 | |
Balancing Airflow | . 9. | |||
Unpacking and Contents | .2 | |||
.System. . . . | 10. . | |||
Location Considerations | 3 | |||
Constant On Operation | 10. . | |||
|
| |||
Mechanical Installation |
| Operation with Home Comfort Control™ | 10 | |
Wall Mount | .4. | Operation with 8120 Ventilation Controller |
| |
Ceiling Mount | 5. . . . | . . or. . | .10 | |
Ducting | 6 | Troubleshooting | 12. . | |
|
|
READ AND SAVE THESE INSTRUCTIONS
1
