Aastra Telecom 41-001343-02 Enabling/Disabling SCA Call Bridging Feature, Line Key Phone Behavior

Operational Features

Line Key Phone Behavior

State	Line Key Pressed for Local	Line Key Pressed for Remote
Idle	N/A	Attempt to seize the line
Seized	Hang up	Ignore
Progressing	Hang up	Ignore
Alerting	answer	N/A
Active	Hold	Bridge
Held	Retrieve	Bridge
Hold private	Retrieve	Ignore
Bridge-active	Hold	Bridge
Bridge-held	Retrieve	Bridge

6867i Softkeys

State	Softkey Image for Local	Softkey LED for Local	Softkey Image for Remote		Softkey LED for Remote
Idle		Off			Off
Seized		Solid Red			Solid Red
Progressing (outgoing call)		Solid Red			Solid Red
Alerting (incoming call)		Flashing Red			N/A
Active		Solid Red			Solid Red
Held		Slow Flashing Red			Slow Flashing Red
				(Blinking)
	(Blinking)
Hold Private		Slow Flashing Red			Solid Red
	(Blinking)			(Blinking)
Bridge-Active		Solid Red			Solid Red
Bridge-Held		Slow Flashing Red			Solid Red
	(Blinking)			(Blinking)

Enabling/Disabling SCA Call Bridging Feature

Use the following procedure to enable/disable SCA call bridging on the IP Phones.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section,“Shared Call Appearance (SCA) Call Bridging” on page A-78.

5-178 41-001343-02 REV04 – 05.2014