Aastra Telecom 41-001343-02 This is the value you assign to the programmable key, On the phone

Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters

Parameter –	Configuration Files
prgkeyN value	aastra.cfg, <model>.cfg, <mac>.cfg
Description	This is the value you assign to the programmable key.

The “prgkeyN value” parameter can be set for the following softkey types only:

	• speeddial (you can enter a speeddial number for this field; optionally, you can also enter
		a prefix for the speeddial value to allow the phone to dial the prefix after you press the
		speeddial programmable key; you then enter the rest of the number from the keypad
		on the phone).
	•	line
	•	blf
	•	sprecode
	•	dcp
	•	xml
	•	park
	•	pickup
	•	blfxfer
	•	speeddialxfer
	•	speeddialconf
	•	speeddialmwi
	•	redial
	•	filter
	•	paging
	Notes:
	• For speeddial the value is the phone number, extension, or prefix number to enter for
		the softkey.
	• For line the value is optional; for example L4.
	• For blf the value is the extension you want to monitor.
	• For sprecode the value is dependent on services offered by server.
	• For park and pickup valid values, see Chapter 5, the section, “Park/Pickup Call Server
		Configuration Values” on page 5-182.
	• For xml you can specify a URI to use for this XML softkey. The variables you can use with
		the XML softkey URI are:
		• $$SIPUSERNAME$$
		• $$SIPAUTHNAME$$
		• $$PROXYURL$$
		•	$$LINESTATE$$
		•	$$LOCALIP$$
		• $$REMOTENUMBER$$
		• $$DISPLAYNAME$$
		• $$SIPUSERNAME$$
		• $$INCOMINGNAME$$
		• $$CALLDURATION$$
		• $$CALLDIRECTION$$
	• For paging the value is the ip and port (the port range is from 1 to 65535).
Format	String
Default Value	Not Applicable
Range	Not Applicable
Example	prgkey3 value: 411
	prgkey4 value: 123456+ (example of a speeddial prefix)

41-001343-02 REV04 – 05.2014 A-168