Aastra Telecom 41-001343-02 manual Group Paging RTP Settings, Key Mapping

Administrator Level Options

Group Paging RTP Settings

Parameter in	Parameter in Configuration	Description
Aastra Web UI	Files

Paging Listen Addresses paging group listening

Note:

This option can be set by both

Users and Administrators.

Allows you to specify up to 5 listening multicast addresses to send/receive a Real Time Transport Protocol (RTP) stream to/from these pre-configured multicast addresses without involving SIP signaling.

For more information on this feature, see “Group Paging RTP Settings” on page 5-82.

Key Mapping

Parameter in	Parameter in Configuration	Description
Aastra Web UI	Files
Map Redial Key To	map redial key to	Sets the Redial key as a Speeddial key if a value is entered for this parameter. If you
		leave this parameter blank, the Redial key returns to its original functionality.
		Note:
		If you configure the Redial key for speeddialing on the 9480i CT or 6757i CT Base Sta-
		tions, the Redial key on the 9480i CT and 6757i CT handsets retain their original func-
		tionality. The Redial key on the handset is not configured for speed dial.
		For more information on this feature, see “Speeddial Key Mapping” on page 5-84.
Map Conf Key To	map conf key to	Sets the Conf key as a Speeddial key if a value is entered for this parameter. If you
		leave this parameter blank, the Conf key returns to its original functionality.
		Note:
		If you configure the Conf key for speeddialing on the 9480i CT or 6757i CT Base Sta-
		tions, the Conf key on the 9480i CT and 6757i CT handsets retain their original func-
		tionality. The Conf key on the handset is not configured for speeddial.
		For more information on this feature, see “Speeddial Key Mapping” on page 5-84.
NA	map redial as dtmf	The “Redial” key remappings has the same behavior as the “Speed Dial” key when the
		phone is idle. During an active call the phone will send the custom number as DTMF
		using the phone configured DTMF method (inbound vs out-of-band RFC2833 vs SIP
		INFO).
		When a user presses the Redial key, the mapped number will be sent out as DTMF
		during an active call if the current “map redial key to” parameter is configured to a
		number and the “map redial as dtmf” parameter is set to “1”.
		For more information on this feature, see “Speeddial Key Mapping” on page 5-84.
NA	Map redial as conf	The “Redial” key remappings has the same behavior as the “Speed Dial” key when the
		phone is idle. During an active call the phone will send the custom number as DTMF
		using the phone configured DTMF method (inbound vs out-of-band RFC2833 vs SIP
		INFO).
		When a user presses the Conf key, the mapped number will be sent out as DTMF dur-
		ing an active call if the current “map conf key to” parameter is configured to a
		number and “map conf as dtmf” parameter is set to “1”.
		For more information on this feature, see “Speeddial Key Mapping” on page 5-84.

41-001343-02 REV04 – 05.2014 3-20