Aastra Telecom 41-001343-02 manual ExpmodX keyN value, Cates the status of the line

Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters

Parameter –	Configuration Files
expmodX keyN value	aastra.cfg, <model>.cfg, <mac>.cfg
Description	The text label that displays on the IP phone for the softkey on the Expansion Module.
	The “expmodX keyN value” parameter can be set for the following softkey types only:
	• speeddial (you can enter a speeddial number for this field; optionally, you can also
		enter a prefix for the speeddial value to allow the phone to dial the prefix after you
		press the Speeddial key; you then enter the rest of the number from the keypad on the
		phone).
	•	line
	•	blf
	•	sprecode
	•	dcp
	•	xml
	•	park
	•	pickup
	•	blfxfer
	•	speeddialxfer
	•	speeddialconf
	•	speeddialmwi
	•	redial
	•	filter
	•	paging
	Notes:
	•	For the 6757i and 6757i CT phones, an icon appears beside the softkey label that indi-
		cates the status of the line.
	•	For speeddial the value is the phone number, extension, or prefix number to enter for
		the softkey.
	•	For line the value is optional; for example L4.
	•	For blf the value is the extension you want to monitor.
	•	For sprecode the value is dependent on services offered by server.
	•	For park and pickup valid values, see Chapter 5, the section, “Park/Pickup Call Server
		Configuration Values” on page 5-182.
	•	For xml you can specify a URI to use for this XML softkey. The variables you can use with
		the XML softkey URI are:
		• $$SIPUSERNAME$$
		• $$SIPAUTHNAME$$
		• $$PROXYURL$$
		•	$$LINESTATE$$
		•	$$LOCALIP$$
		• $$REMOTENUMBER$$
		• $$DISPLAYNAME$$
		• $$SIPUSERNAME$$
		• $$INCOMINGNAME$$
		• $$CALLDURATION$$
		• $$CALLDIRECTION$$
	•	For paging the value is the ip and port (the port range is from 1 to 65535).
Format	String
Default Value	Not Applicable
Range	Not Applicable
Example	expmod1 key1 value: 9
	expmod1 key2 value: 411
	expmod1 key3 value: 123456+ (example of a speeddial prefix)

41-001343-02 REV04 – 05.2014 A-180