Aastra Telecom 41-001343-02 manual Configuring Centralized Conferencing Using the Aastra Web UI

Operational Features

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Centralized Conferencing Settings” on page A-79.

Configuring Centralized Conferencing Using the Aastra Web UI

Use the following procedure to configure centralized conferencing using the Aastra Web UI.

Aastra Web UI

Global Configuration

1.Click on Advanced Settings->Global SIP Settings->Basic SIP Network Settings.

2.In the “Conference Server URI” field, do one of the following actions:

•To disable centralized conferencing on the IP phone, leave this field empty (blank).

•To enable SIP centralized conferencing on the IP phone, do one of the following actions:

–If you have specified a proxy server/registrar server, then to reach the media server via the proxy server, set this field to one of the fol- lowing:

conf (Sylantro server), or

Conference (Broadsoft server)

By setting this field to conf or Conference, you specify conf@<proxy_server _address>: <proxy_port>. For example, if the proxy server address is 206.229.26.60 and the port used is 10060, then by setting this parameter to conf, you are specifying the following: conf@206.229.26.60:10060.

–To reach the media server using a different address/port than that specified by the proxy, set this field to the following: conf@<media_server _address>: <media_port>

3.Click Save Settings to save your changes.

41-001343-02 REV04 – 05.2014 5-269