Aastra Telecom 41-001343-02 manual Configuring DND Using the Configuration Files, Example

Operational Features

Configuring DND Using the Configuration Files

You use the following parameters to configure DND on the IP Phone:

•dnd key mode

•softkeyN type, topsoftkeyN type, prgkeyN type, or expmodX keyN type

•softkeyN states (optional)

Note:

If there is no DND key configured or if it is removed, DND is disabled on the IP Phone.

Example

The following is an example of configuring the mode for DND in the configuration files:

dnd key mode: 2

softkey1 type: dnd

softkey1 states: idle connected incoming outgoing busy

In the above example, softkey 1 is configured for DND for line 1 only, with a “custom” configuration. Pressing softkey 1 dis- plays DND screens for which you can customize on the phone.

Configuration Files

To set DND in the configuration files, see Appendix A, the sections:

•“DND Key Mode Settings” on page A-127.

•“Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters” on page A-156.

41-001343-02 REV04 – 05.2014 5-157