Aastra Telecom 41-001343-02 manual Call Hold Reminder Settings

Operational, Basic, and Advanced Parameters

Call Hold Reminder Settings

Parameter –	Configuration Files
call hold reminder	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Enables or disables the reminder ring splash timer to start as soon as you put a call on hold
	(even when no other calls are active on the phone). When enabled, the phone initiates a
	reminder ring splash periodically for the single call on hold. When disabled, no reminder
	ring splash is audible.
Format	Boolean
Default Value	0
Range	0	(disable)
	1	(enable)
Example	call hold reminder: 1

Parameter –	Configuration Files
call hold reminder during active calls	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Enables or disables the ability for the phone to initiate a continuous reminder tone on
	the active call when another call is on hold. For example, when the call on Line 1 is on
	hold, and the User answers a call on Line 2 and stays on that line, a reminder tone is
	played in the active audio path on Line 2 to remind the User that there is still a call on
	hold on Line 1.
	When this feature is disabled, a ring splash is heard when the active call hangs up and
	there is still a call on hold.
Format	Boolean
Default Value	0
Range	0	(disable)
	1	(enable)
Example	call hold reminder during active calls: 1

Parameter –	Configuration Files
call hold reminder timer	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Specifies the time delay, in seconds, that a ring splash is heard on an active call when
	another call was placed on hold. For example, if a call comes into Line 1, and then a call
	comes into Line 2 and you answer Line 2, Line 1 is automatically placed on hold. While on
	the active Line 2, after 7 seconds, a ring splash audio sounds on the line reminding you
	that the call on Line 1 is still on hold. This timer begins to increment after Line 2 is
	answered.
	Notes:
	• This parameter is used with the “call hold reminder frequency” parameter.
	• You must enable this “call hold reminder timer” parameter for it to work.
	• A value of “0” disables the call hold reminder feature.
Format	Integer
Default Value	7
Range	0-4294967295 seconds
Example	call hold reminder timer: 10

A-123 41-001343-02 REV04 – 05.2014