Aastra Telecom 41-001343-02 manual Phone, contact Aastra Technical Support

Operational, Basic, and Advanced Parameters

Parameter –	Configuration Files
sips private key	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Allows you to specify a Private Key file to use when the phone uses the TLS transport pro-
	tocol to setup a call.
	This parameter is required when configuring TLS (optional for Persistent TLS.)
	You can use this parameter in three ways:
	• To download no private key
	• To download a private key from the original configuration server
	• To download a private key from another specified server
	To download a specific file, the string value MUST HAVE A FILENAME at the end of the
	string. For example:
	sips private key: ftp://admin:admin!@1.2.3.4:50/path/phonesPrivatekey.pem
	where “path” is the directory and “phonesPrivateKey.pem” is the filename. If you do not
	specify a filename, the download fails.
	See examples for each below.
	Note:
	The key file must use the format “.pem”. To create specific private key files to use on your IP
	phone, contact Aastra Technical Support.
Format	<filename>.pem
Default Value	Not Applicable
Range	Not Applicable
Example	The following example downloads no private key file:
	sips private key:
	The following example downloads the private key file from the original configuration
	server.
	sips private key: phonesPrivateKey.pem
	The following example uses FTP to download the firmware file “phonesPrivateKey.pem”
	(private key file) from the “path” directory on server 1.2.3.4 using port 50:
	sips private key: ftp://admin:admin!@1.2.3.4:50/path/phonesPrivateKey.pem

41-001343-02 REV04 – 05.2014 A-92