PC Connection

Downloading the Image(s)

Under Macintosh Operating System (Mac 9.X or later)

Downloading Image(s) From Removable Disk

1. Turn on the PC.

2. Switch on the camera.

3. Connect the camera to the PC with USB cable under any working mode. Please make sure the USB cable is well connected to the PC and camera.

4. When the USB cable is connected to the PC, it will create a new icon named "untitled" on the desktop.

5. Double click on the icon.

6. The stored image(s) can be found in the folder of DCIM \ 100MEDIA \.

7. View any image by double-clicking it.

Downloading Image(s) Through Ulead Photo Explorer

1. Connect the camera to the PC with USB cable under any working mode. Please make sure the USB cable is well connected to the PC and camera.

2. Start Ulead Photo Explorer 7.0 SE Platinum .

3. Click File \Download From Memory Card to get the stored image(s).

62

Appendix

Error Message Table

 

Message

Cause

Solution

 

 

 

 

 

 

 

 

 

 

 

 

There is insufficient card

Delete the stored image(s) in the

 

CARD FULL

 

memory capacity to store an

memory card or insert a new

 

 

 

 

 

image.

memory card.

 

 

 

 

 

 

 

 

 

 

 

 

There is insufficient internal

Delete the stored image(s) in the

 

MEMORY FULL

memory capacity to store an

 

flash memory.

 

 

 

 

 

image.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CARD

 

 

 

 

LOCKED

The SD card is locked

Set the SD card protection switch

 

(CARD ICON is

to non-protection position.

 

 

 

BLINKING)

 

 

 

 

 

 

 

 

 

 

 

LOCK

 

The image can't be deleted

Unlock the protected image.

 

 

while it is protected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There is no image stored in the

 

 

NO IMAGE

memory card or built-in flash

 

 

 

 

 

 

memory.

 

 

 

 

 

 

 

 

 

FILE ERROR

 

Delete this image and take the

 

 

picture again.

 

 

 

 

 

 

 

 

 

 

 

 

 

MEMORY ERROR

 

Format the flash memory.

 

 

 

 

 

 

 

 

CARD ERROR

 

Insert a new memory card or

 

 

format the card

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The environment is too dark in

Set the flash mode to Auto Flash

 

LOW LIGHT!

"Flash Off" or “Night Scene”

 

or Fill -in Flash.

 

 

 

 

 

mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HAND SHAKE ICON

The environment is too dark in

Set the flash mode to Auto Flash

 

"Flash Off" or “Night Scene”

 

(

 

 

)

or Fill -in Flash.

 

 

 

mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LENS COVER

The lens cover is closed.

Please open the lens cover

 

before taking pictures.

 

 

 

 

 

 

 

 

 

 

 

 

 

63

Page 32
Image 32
Konica Minolta KD-30M user manual Appendix, Error Message Table