Aastra Telecom 41-001343-02 Basic Settings, General Settings, Parameter, Aastra Web UI Files

Administrator Level Options

Basic Settings

An Administrator has access to specific Basic Setting options to configure and manage the IP Phone in the network. The following sections identify the options available to an Administrator only, or where indicated, to a User and Administrator. These tables also identify whether you can configure them using the Aastra Web UI, IP Phone UI, or the configuration files.

General Settings

Parameter in	Parameter in Configuration	Description
Aastra Web UI	Files
Local Dial Plan	sip dial plan	A dial plan that describes the number and pattern of digits that a user dials to reach
		a particular telephone number. Dial Plan field accepts up to 512 characters.
		For more information on this feature, see “Local Dial Plan” on page 5-52.
Send Dial Plan Terminator	sip dial plan terminator	Specifies whether or not pressing the hash/pound (i.e. "#") key, while performing an
		outgoing call on an open line, should be sent as %23 to the proxy in the dial string or
		if the key should be used as a dial plan terminator (i.e. dials out the call immediately).
		For more information on this feature, see “SIP Dial Plan Terminator” on page 5-53.
Digit Timeout	sip digit timeout	Represents the time, in seconds, to configure the timeout between consecutive key
		presses.
		For more information on this feature, see. “Digit Timeout” on page 5-53.
Park Call	sip lineN park pickup config	The parking of a live call to a specific extension.

Note:

This option can be set by both Users and Administrators.

This feature on the Basic Preferences screen is available on all phones EXCEPT the 9143i, 6753i, 6863i, and 6865i.

To configure the Park feature on a key, see Chapter 5, the section, “Park/Pick Up Static and Programmable Configuration” on page 5-177.

Pick Up Parked Call sip lineN park pickup config Picking up a parked call at the specified extension.

Note:

This option can be set by both Users and Administrators.

This feature on the Basic Preferences screen is available on all phones EXCEPT the 9143i, 6753i, 6863i, and 6865i.

To configure the Pickup feature on a key, see Chapter 5, the section, “Park/Pick Up Static and Programmable Configuration” on page 5-177.

N/A	suppress dtmf playback	Enables and disables suppression of DTMF playback when a number is dialed from
		the softkeys or programmable keys.
		For more information on this feature, see. “Suppressing DTMF Playback” on page 5-
		55.
Display DTMF Digits	display dtmf digits	Enables and disables the display of DTMF digits on the IP phone display during a con-
		nected state.
Note:
This option can be set by both		For more information on this feature, see. “Display DTMF Digits” on page 5-55.
Users and Administrators.
Play Call Waiting Tone	call waiting tone	Enable or disables the playing of a call waiting tone when a caller is on an active call
		and a new call comes into the phone.
Note:		For more information on this feature, see. “Call Waiting Tone” on page 5-58.
This option can be set by both
Users and Administrators.
Stuttered Dial Tone	stutter disabled	Enable or disables the playing of a stuttered dial tone when there is a message wait-
		ing on the IP phone.
Note:

This option can be set by both Users and Administrators.

For more information on this feature, see. “Stuttered Dial Tone” on page 5-61.

41-001343-02 REV04 – 05.2014 3-16