Aastra Telecom 41-001343-02 manual Accept the User-provided certificates

Operational, Basic, and Advanced Parameters

Parameter–	Configuration Files
https user certificates	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Specifies a file name for a .PEM file located on the configuration server. This file contains the
	User-provided certificates in PEM format. These certificates are used to validate peer certifi-
	cates.
	Note:
	You must disable the “https validate certificates” parameter in order for the phone to
	accept the User-provided certificates.
	You can use this parameter in three ways:
	• To download no certificates
	• To download a certificate from the original configuration server
	• To download a certificate from another specified server
	To download a specific file, the string value MUST HAVE A FILENAME at the end of the string.
	For example:
	https user certificates: ftp://admin:admin!@1.2.3.4:50/path/phonesHTTPSUserCert.pem
	where “path” is the directory and “phonesHTTPSUserCert.pem” is the filename. If you do not
	specify a filename, the download fails.
	See examples for each below.
Format	Alphanumeric string in the format <filename.pem>
Default Value	Not Applicable
Range	Not Applicable
Example	The following example downloads no HTTPS user certificate file:
	https user certificates:
	The following example downloads the HTTPS user certificate file from the original configura-
	tion server.
	https user certificates: phonesHTTPSUserCert.pem
	The following example uses FTP to download the firmware file “phonesHTTPSUserCert.pem”
	(HTTPS user certificate file) from the “path” directory on server 1.2.3.4 using port 50:
	https user certificates:ftp://admin:admin!@1.2.3.4:50/path/phonesHTTPSUserCert.pem

A-33 41-001343-02 REV04 – 05.2014