Aastra Telecom 41-001343-02 manual Handset Feature Key Settings

Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key

Handset Feature Key Settings

Note:

Applicable to the 9480i CT and 6757i CT IP Phones only.

Parameter –	Configuration Files
featurekeyN type	aastra.cfg, <model>.cfg, <mac>.cfg
Description	The type of feature key to configure. Valid types are:
	• none - Indicates key is disabled.
	• line - Indicates key is configured for line use. Value can be: line1, line2, line3, line4,
	line5, line6, line7, line8, or line9.
	• xfer- Indicates key is configured for transferring a call.
	• conf - Indicates key is configured for conference calling.
	• public - Indicates key is configured to toggle from public to private mode. A public
	and private softkey can be used when at a line item in the Directory List. The Private
	key toggles a number in the Directory List to private. The Public key allows a number
	in the Directory List to be sent to the handsets. A 6757i CT accepts a maximum of 50
	entries with the public attribute.
	• icom - Indicates key is set to be used to make an intercom call.
	• directory - Indicates key is set for accessing the Directory List.
	• callers - Indicates key is set for accessing the Callers List.
	• park- Indicates key is configured to park incoming calls when pressed.
	• pickup- Indicates key is configured to pick up parked calls when pressed.
	• flash - Indicates key is set to generate a flash event when it is pressed CT handsets. The
	IP phone generates flash events only when a call is connected and there is an active
	RTP stream (for example, when the call is not on hold).
Format	Text
Default Value	None
Range	none
	line1, line2, line3, line4, line5, line6, line7, line8, line9
	transfer
	conference
	public
	icom
	directory
	callers (“Callers List” in Aastra Web UI)
	park
	pickup
	flash
Example	featurekey1 type: line3
	featurekey2 type: public
	featurekey3 type: park
	featurekey4 type: pickup

A-175 41-001343-02 REV04 – 05.2014