Aastra Telecom 41-001343-02 manual Configuring the Speeddial/Conf Key Using the Aastra Web UI

Operational Features

topsoftkey1 type: speeddialconf

topsoftkey1 label: Sales

topsoftkey1 value: 5645

topsoftkey1 line: 3

prgkey1 type: speeddialconf

prgkey1 value: 5645

prgkey1 line: 1

expmod1 key1 type: speeddialconf

expmod1 key1 label: Sales

expmod1 key1 value: 5645

expmod1 key1 line: 3

Refer to the following in Appendix A to configure a Speeddial/Conf key on the IP phone using the configuration files.

Configuration Files

To set a Speeddial/Conf key using the configuration files, see Appendix A, “Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters” on page A-156.

Configuring the Speeddial/Conf Key Using the Aastra Web UI

Use the following procedure to configure the Speeddial/Conf Key using the Aastra Web UI.

Aastra Web UI

1.Click on Operation->Softkeys and XML. or

Click on Operation->Programmable Keys. or

Click on Operation->Expansion Module Keys.

2.In the “Type” field, select Speeddial/Conf from the list of options.

3.In the “Label” field, enter a key label to assign to the Speeddial/Conf key (for example, “Sales”).

4.In the “Value” field, enter the number that the phone dials when the Speeddial/Conf key is pressed (for example, “4556”).

5.In the “Line” field, select the line for which you want to use the key functionality.

6.For phones with softkeys:

In the States field, select the state(s) (idle, connected, incoming, outgoing, busy) for which you want to use on the key.

Note:

States are not applicable to programmable keys (9143i, 6730i, 6731i, 6735i, 6753i, 6755i, 6863i, 6865i).

7.Click Save Settings to save your changes.

5-144 41-001343-02 REV04 – 05.2014