Aastra Telecom 41-001343-02 manual Multiple Configuration Server Settings, Additional Information

	Operational, Basic, and Advanced Parameters
Multiple Configuration Server Settings
Parameter –	Configuration Files
firmware server	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Specifies either a full or partial URL of a server (other than the original configuration
	server) from which the phones in the network get their firmware.
	Note:
	The default method for the update of firmware to the phones is from the original con-
	figuration server. The Administrator must specify a correct server URL for the phones to
	get their firmware information from that server. If the URL is incorrect, no firmware
	download occurs to the phones from the specified server.
Format	String (up to 256 characters)
	FTP
	“ftp://username:password@0.0.0.0:port/path”
	TFTP
	“tftp://0.0.0.0:port/path”
	HTTP
	“http://0.0.0.0:port/path”
	HTTPS
	“https://0.0.0.0:port/path”
	Partial URL
	“/path”
Default Value	Blank
Range	Not Applicable
Example	firmware server:
	Leaving this parameter blank downloads all configuration and firmware files from the
	original configuration server.
	firmware server: tftp://10.30.102.158/test1
	The above example uses TFTP to download all firmware files that exist in the “test1”
	directory on the specified server, to the phones.
	firmware server: /path
	The above example uses the configuration server that is linked to the partial path to load
	the firmware.

Additional Information

The directory files, language packs, TLS certificate files, 802.1x certificate files, and HTTPS files can also be downloaded to the phone from a server other than the configuration server. For each of these types of files, you can specify a URL (server IP address) from which the phone gets these files. You can use existing parameters on the phone to specify the URL. For more information about this feature, refer to Chapter 1, the section, “Directory Files, Language Packs, TLS Certificates, 802.1x Certificates, HTTPS Files and Multiple Configuration Servers” on page 1-53.

For information on configuring the directory, language pack, TLS certificates, 802.1x certificates, and HTTPS parameters, see the applicable parameters in this Appendix.

41-001343-02 REV04 – 05.2014 A-24