Aastra Telecom 41-001343-02 manual Configuration Server Settings, Polling Action URIs, Protocol on

Administrator Level Options

Polling Action URIs

Another way to reach a phone behind a NAT/firewall is to have the phone make an XML call at periodic intervals. An Administrator can use the action uri poll to command the phone to perform an XML call at configurable intervals.

An Administrator can specify the URI to be called and specify the interval between polls. Configuration of this feature is dynamic (no reboot required).

Reference

For more information about configuring the polling and polling interval of Action URIs, see “Polling Action URIs” on page 5-252.

Configuration Server Settings

The configuration server stores the firmware images, configuration files, and software when performing software upgrades to the IP phone. An administrator can configure the following parameters for the configuration server:

Parameter In	Parameter in	Parameters in Configuration	Description
IP Phone UI	Aastra Web UI	Files
Download Protocol Settings
Download Protocol	Download Protocol	download protocol	Protocol to use for downloading new versions of software to
			the IP phone. Valid values are:
			TFTP
			FTP
			HTTP
			HTTPS

			Note:
			For DHCP to automatically populate the IP address or
			domain name for the download servers, your DHCP server
			must support Option 66. The IP phones also support Option
			60 and 43.
			For more information, see Chapter 4, the section, “DHCP” on
			page 4-3.
			For more information about download protocols on the IP
			Phone, see Chapter 4, “Configuration Server Protocol” on
			page 4-87.
Primary TFTP	TFTP Server	tftp server	The TFTP server’s IP address or qualified domain name. If
			DHCP is enabled and the DHCP server provides the informa-
			tion, this field is automatically populated. Use this parameter
			to change the IP address or domain name of the TFTP server.
			This will become effective after this configuration file has
			been downloaded into the phone.
			For more information, see Chapter 4, “Configuration Server
			Protocol” on page 4-87.
Primary TFTP Path	TFTP Path	tftp path	Specifies the path name for which the configuration files
			reside on the TFTP server for downloading to the IP Phone.
			If the IP phone’s configuration and firmware files are located
			in a sub-directory beneath the server’s root directory, the rel-
			ative path to that sub-directory should be entered in this
			field.
			Note:
			Enter the path name in the form folderX\folderX\folderX. For
			example, ipphone\6757i\configfiles.
			For more information, see Chapter 4, “Configuration Server
			Protocol” on page 4-87.

3-47 41-001343-02 REV04 – 05.2014