Aastra Telecom 41-001343-02 manual Using Options 159 and 160 on the IP Phone, Press

Network Settings

IP Phone UI

1.Press Options, and then select Administrator Menu.

2.Select Network Settings.

3.Select DHCP Settings.

4.Select DHCP User Class.

5.In the “DHCP User Class” field, enter a DHCP User Class to apply to your phones, then press DONE. Valid values are up to 64 alpha-numeric characters. For example, “admin”.

6.Restart the phone for the change to take affect.

For the 6867i:

1.	on the phone to enter the Options List.
Press

2.Press the Advanced softkey.

3.Enter the Administrator password using the keypad. Default is “22222”.

4.Select Network > Settings.

5.Press the down navigation key to the DHCP User Class field.

6.In the “DHCP User Class” field, enter a DHCP User Class to apply to your phones, then press the Save softkey. Valid values are up to 64 alpha-numeric characters. For example, “admin”.

7.Restart the phone for the change to take affect.

Using Options 159 and 160 on the IP Phone

In addition to DHCP options 43 and 66 already supported on the IP Phones, the phones also support DHCP Options 159 and 160. The IP Phones use the following order of precedence when deriving the configuration server parameters: 43, 160, 159, 66.

In addition, an administrator can override this order of precedence by setting a configuration parameter called, dhcp con- fig option override (configuration files), DHCP Download Options (Aastra Web UI), or Download Options (IP Phone UI). Setting this parameter results in the phone only using the chosen DHCP option and ignoring the other options.

For more information about setting DHCP download preference, see “Configuration Server Download Precedence” on page 4-15.

Note:

Administrators should review the updated IP phone DHCP option precedence order and configuration options to avoid potential impact to existing Aastra IP phone deployments.

Configuring DHCP Download Options on the IP Phones

Use the following procedures to configure DHCP Option Override on the IP Phone.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “DHCP Option Settings” on page A-12.

IP Phone UI

1.Press Options, and then select Administrator Menu.

2.Enter you Administrator password and press Enter.

41-001343-02 REV04 – 05.2014 4-13