Stuttered Dial Tone | Aastra Telecom 41-001343-02 instruction

Operational Features

Stuttered Dial Tone

You can enable or disable the playing of a stuttered dial tone when there is a message waiting on the IP phone. You can configure this feature using the configuration files and the Aastra Web UI.

Configuring Stuttered Dial Tone

Use the following procedures to configure stuttered dial tone on the IP phones.

Configuration Files

For specific parameters you can set in the configuration files for enabling/disabling stuttered dial tone, see Appendix A, the section, “Stuttered Dial Tone Setting” on page A-125.

Aastra Web UI

1.Click on Basic Settings->Preferences->General.

2.The "Stuttered Dial Tone" field is enabled by default. To disable this field, uncheck the box.

3.Click Save Settings to save your changes.

41-001343-02 REV04 – 05.2014

5-61

Image 301

Aastra Telecom 41-001343-02 manual Configuring Stuttered Dial Tone

Contents

Aastra 6700i, 6800i, and 9000i Series SIP IP Phones Software License Agreement Software License Agreement Content Chapter Configuring Operational Features Content Vii Authentication Support for HTTP/HTTPS Download Methods Content Encrypted Files on the IP Phone Appendix a Xii Xiii Xiv Content Appendix B Appendix E Audience PrefaceDocumentation For Go to Chapters and Appendices in this Guide Topics About this ChapterTopic Description IP Phone ModelsReferences 9143i 9480i Power Adapter Optional AccessoriesSeries 6700i Wall Mount Kit M670i/M675i Expansion Modules Daisy-Chaining Support Modules When Powered Via PoEReference Maximum Number of Diasy-Chained PoE Class 6800i Series M680i Software Upgrades6800i Wall Mount Kit M680i Expansion Module Model 6730i IP Phone 6730i Phone Features Symbol and Text Symbol Keys Text Keys Key Description 6730i Symbol and Text Key Descriptions None Line Model 6731i IP Phone 6731i Phone Features Symbol and Text Mal. The Right arrow key sets the option 6731i Symbol and Text Key Descriptions Line Model 6735i IP Phone 6735i Phone Features Symbol and Text Only options 6735i Symbol and Text Key DescriptionsAls the last dialed number Microphone is on mute Dial Allows you to dial out on the phone Model 6737i IP Phone 6737i Phone Features Symbol and Text Last dialed number 6737i Symbol and Text Key DescriptionsMicrophone is on mute None Model 6739i IP Phone 6739i Phone Features Symbol and Text Only options 6739i Symbol and Text Key DescriptionsLight that is flashing or press the Hold key again Called your phone Line Model 6753i IP Phone 6753i Phone Features Symbol and Text Keys 6753i Symbol and Text Key Descriptions IP Phone Models Model 6755i IP Phone 6755i Phone Features Symbol and Text 6755i Symbol and Text Key Descriptions None 6757i CTwith Symbol or Text Keys 6757i and 6757i CT Phone Features Symbol and TextModel 6757i and 6757i CT IP Phones Trator-only options 6757i and 6757i CT Symbol and Text Key Descriptions None 6757i CT Cordless Handset Features Function # Function Description 6757i CT Cordless Handset Key Descriptions Model 6863i IP Phone 6863i Phone Features KeyDescription 6863i Key Description Model 6865i IP Phone 6865i Phone Features 6865i Key Description IP Phone Models Model 6867i IP Phone 6867i Phone Features 6867i Key Description IP Phone Models Model 9143i IP Phone 9143i Phone Features Text Keys Symbol Keys Key Description 9143i Symbol and Text Key DescriptionsTo 3 line keys Speakerphone More information about Administrator optionsPhone. Each entry can contain a maximum of 16 letters Numbers Model 9480i and 9480i CT IP Phones 9480i and 9480i CT Phone Features9480i CT Keys Key Description 9480i and 9480i CT Key DescriptionsSaving changes Transfer key Transfers an active call to another number Ic om 9480i CT Cordless Handset Features 9480i CT Cordless Handset Key Descriptions Installation Considerations Firmware Installation InformationInstallation Requirements Configuration Server Requirement Firmware and Configuration Files Installing the Firmware/Configuration Files Configuration File Precedence Firmware Files and Multiple Configuration Servers Multiple Configuration Server SupportExamples Firmware server Specifying a Server to Download Firmware FilesAre, by order Or another specified server are, by order Type of File Phone Directory Files Language Pack Files 802.1x Security Authentication Certificate FilesTransport Layer Security TLS Certificate Files Https User Certificate Files Chapter Configuration Interface Methods IP Phone UI Configuration MethodsOptions Key 9143i Options Key9480i CT Handset 6739i 6755i 6757i CT Handset Options Key 6730i 6731i 6753i 6735i 6737i Options Key 6863i 6865i 6867i Using the Options Key Aastra Web UI Using the Options Key onPress HTTP/HTTPS Client and Server Support HTTP/HTTPS SupportNon-Blocking Http Connections Https Client Using Https via the Aastra Web UI IP address or host name Accessing the Aastra Web UI IP phones accept numeric passwords only Enter your username and password and click OKStatus Tion. Applicable Administrator only To prevent use of the phone, and reset the user passwordOperation Heading Description Specify number of rings for a No Answer state Basic Settings Crash File Retrieval on Advanced Settings Applicable to Administrator Only Using the Configuration Files Configuration Files Administrator OnlyTo Disable the Aastra Web UI Enabling/Disabling the Aastra Web UI Limitations Locking Parameters in the Configuration File Aastra.cfg ExampleModel.cfg Mac.cfg Limitation Configuration Server Redundancy via DNS a Records Chapter Administrator Options Administrator Menu Administrator Level OptionsIP Phone UI Options Advanced Menu 6867i Aastra IP PhoneReferences For all model phones Except the 6739i Simplified IP Phone UI Options MenuFor Full Options Menu Simplified Options Menu Configuring the Simplified IP Phone UI Options Menu Basic Settings-Preferences-General Operation-ResetAastra Web UI Options User Web UI Menu Advanced Settings Phone Status Configuration File OptionsPhone Status via IP Phone UI Phone Status All IP Phones Except the 6739i Phone Status for 6867i IP Phone Phone Status via Aastra Web UINetwork IP Address MAC Address Hardware Information Network StatusFirmware Information SIP Status Restarting Your Phone Restarting the Phone Using the IP Phone UISelect Restart Phone For Click on Operation-Reset-Phone Restarting the Phone Using the Aastra Web UIClick Restart to restart the phone Setting Factory Defaults on the Phone Set Phone to Factory Defaults/Erase Local ConfigurationSetting Factory Defaults Using the IP Phone UI Select Factory Default For 3-Line LCD Displays Settings Factory Defaults Using the Aastra Web UI Erasing the Phone’s Local ConfigurationSelect Erase Local Config For 3-Line LCD Displays Erase local config? prompt displays Press Erase to confirm Button or press the Select softkey Select Erase Local Cfg. using General Settings Basic SettingsUsers and Administrators Parameter Administrator only This option can be set by both Users and AdministratorsValue of 0 disables the call hold reminder feature This option can be set by an Section, Do Not Disturb DND on Description Aastra Web UI FilesSection, Call Forwarding on Elin on Incoming/Outgoing Intercom Calls Aastra Web UI Files Incoming Intercom Settings all modelsAnswer and Barge In on Sip intercom line parameter Key Mapping Group Paging RTP Settings Ring Tones Priority Alerting SettingsIP Phone UI Aastra Web UI Files Community 1 through Alert community Auto Call Distribution Alert auto call distributionCommunity Alert community Directed Call Pickup Auto Call Distribution ACD SettingsInterception on Sylantro Servers on Time and Date This option can be set by Both Users and Administra TorsDate on Custom Parameters Live Dialpad For more information on this feature, see Live Dialpad onLanguage French Languages specified Administrator Level Options Network Settings Account ConfigurationDnd key mode Call forward key mode Account Phone Custom Basic Network Settings Notification When Incorrect Network Settings EnteredDhcp Enables or disables DHCP. Enabling Dhcp populates Tion PC Port parameters are not applicable to the 6730i IP Phone IP Phone on Description IP Phone UI Aastra Web UI Files Advanced Network Settings Stun and Turn parameters Cols on Configuration on Https Settings Phones Defining this parameter as 0 disabled significantlyUration files Signed certificates are in use IP Phone UI Aastra Web UI Files Global Settings Type of Service ToS, DscpLAN Port Settings Port IP Phone UI Aastra Web UI Files PC Port Settings Port SIP SettingsPC Port parameters are not applicable to the 6730i IP Phone Ing page for debug purposes Basic SIP Authentication SettingsBridged Line Appearance BLA on Proxy and Failover Support on Basic SIP Network Settings Ing for Sylantro and Broadsoft Servers on Advanced SIP SettingsMissed Call Summary Subscription on Support on Feature-Event Subscription on Description Aastra Web UI Blacklist Duration on This parameter is not applicable to BLF/List subscriptions Tocol RTP Settings on RTP SettingsWhitelist Proxy on Message Codec Preference List Autodial Settings IP Phone Model Available Lines Line Settings Softkeys, Programmable Keys, Expansion Module Keys Action URI Already in a timeout stateXML SIP Notify Events and Action URIs Action URI Description IP Phone UI Aastra Web UI Files Download Protocol Settings Configuration Server SettingsPolling Action URIs For Dhcp to automatically populate the IP address or IP Phones support usernames containing dots See the next parameter http path OptionalServer. See the next parameter https path Informed of an auto-reboot If a user is accessing the Aastra Web UI, they are notUI are not overwritten by an auto-resync update. Auto Phone UI and the configuration files TLS Support Firmware Update FeaturesIP Phone UI Aastra Web UI Tion Files Rity TLS on Description IP Phone UI Aastra Web UI Tion Files To use on your IP phone, contact Aastra Technical Support Private Key Filename Sips private keyTrusted Certificates Sips trusted certificates Certificate in its Trusted Certificate file EAP-TLS Settings EAP-MD5 Settings802.1x Support IP Phone UI Aastra Web UI Tion Files General Troubleshooting About this Chapter References Overview Basic Network Settings Network Settings Enabling/Disabling Dhcp Using the IP Phone UI Enabling/Disabling Dhcp Using the Configuration FilesSelect Administrator Menu Select Network Settings Enabling/Disabling Dhcp Using the Aastra Web UI Dhcp Options 60, 66, and 43 Server ConfigurationsOption Options 60 Sub-Option/Code Description Using Option 43 to Customize the IP Phone Protocol Format Examples Linux Example Using Option 120 on the IP Phone Option 43 Redirection and Configuration Server RCS BypassConfiguring RCS Bypass via Option 43 on a Linux Dhcp Server Considerations Sub Description Rule Option/Code Precedence4095 For example, a Vlan ID of 100 in dec is 00 00 00 64 in hex Using Option 12 Hostname on the IP Phone Press Options, and then select Administrator Menu Configuring Dhcp Option 12 Hostname on the IP PhoneRestart the phone for the change to take affect Configuring Dhcp Option 77 User Class on the IP Phone Using Option 77 User Class on the IP PhoneChanging the Hostname field requires a reboot of your phone Click on Operation-Reset, and click Restart Configuring Dhcp Download Options on the IP Phones Using Options 159 and 160 on the IP PhonePress Press Dhcp Settings Press Dhcp Download Options Select Network Settings Select Dhcp SettingsSelect and press the Option 159 or Option 160 value Press Click on Advanced Settings-Network-Advanced Network Settings Configuration Server Download Precedence Disabled Ignores all Dhcp configuration options 43, 66, 159 Configuring a Download Precedence Using the IP Phone UISelect the Disabled option and press Enter Select and press the Disabled value Multiple Dhcp Servers Configuring a Download Precedence Using the Aastra Web UIDNS Caching Configuring Network Settings Manually For example Auto-negotiation Configuring LAN and PC Port Negotiation Default is AutoNegotiation Select PC Port Link Configuring the LAN Port and PC PortHalf-Duplex 10Mbps , 100Mbps, or 1000Mbps Full-Duplex 10Mbps , 100Mbps or 1000Mbps Select Restart Default is AutoNegotiationPress Ethernet & Vlan Press LAN Port Select Network Ethernet Ports Default is Auto Negotiation Advanced Network SettingsNetwork Address Translation NAT NAT Router Configuration Configuring NAT Address and Port optionalSBC or ALG Proxy/Registrar Other Proxy/Registrars Press the NAT Settings button Select Network Settings Select Static NATSelect NAT RTP Port Sip local port Sip local tls port SIP and TLS Source Ports for NAT TraversalSelect Network NAT Configuration Files Stun and Turn Protocols Click on Advanced Settings-Global SIP-Advanced SIP Settings Stun does not work if the NAT device is symmetric Limitations to Using Stun and Turn Configure Stun on the IP Phone Configuring Stun and Turn Servers Using the Aastra Web UIConfigure Turn on the IP Phone Interactive Connectivity Establishment ICE Support Configuring Https Client and Server Settings Https Client/Server Configuration Configure Https Server Configure Https Client Press Cfg. Svr ForPress Https Press Https Client Method Https Server Certificate Validation Click on Advanced Settings-Network-HTTPS SettingsCertificate Management Aastra Provided Certificates User Interface Certificate ValidationCertificate Rejection Enable/Disable Https Server Certificate Validation Configuring Https Server Certificate ValidationPress Change to toggle the Enable field to Yes or No Enable/Disable Https Validate Certificate Expiration Press Cert. Validation, and select Enable Enable/Disable Https Validate HostnamePress Check Expires, and select Enable Press Check Hostnames, and select Enable Https Validation Certificate Parameters Button to enable the feature Virtual LAN optional Tos priority map SIP Priority RTP Priority Rtcp Priority Dscp Range/VLAN Priority MappingPC Port QoS eth port 1 priority Priority Protocol Name Default Dscp Values in the ToS Field Configuring Type of Service ToS/DSCP optionalDscp Range Vlan Priority 16-23 24-31 32-39 40-47 48-55 56-63 Press Done 3 times to save the changes Press Type of Service DscpSelect Restart Select Network Dscp Click on Advanced Settings-Network-Type of Service Dscp Configuring Vlan optionalSelect Admin Menu To set Vlan ID and priority for PC Port Port To set Vlan ID and priority for LAN Port Port Select PC Port Priority Press the Vlan Disable/Enable button, and then press Enable Press Vlan SettingsPress Ethernet & Vlan Press LAN Port Vlan Select Network Vlan Click on Advanced Settings-Network-VLAN To set Vlan ID and priority for the LAN Port Port To set Vlan ID and priority for the PC Port Port Rport Configuring Rport Using the Aastra Web UI Configuring Rport Using the Configuration FilesConfiguring NTP Servers optional Network Time Servers Press To return to the idle screen For Click on Basic Settings-Preferences-Time and Date SettingSelect Time and Date Set Date and Time Basic SIP Settings Global SIP Settings Sip vmail SIP Global Parameters SIP Per-Line Parameters Global SIP SettingsSip lineN call waiting Sip lineN vmail Backup Proxy/Registrar Support SIP Password MaskingConfiguring SIP Password Masking SIP Precedence Example SIP Outbound Disabled Backup Outbound Proxy and Failover SupportSIP Outbound Support Enabling/Disabling SIP Outbound Draft 15 Support SIP Outbound Enabled Configuring a Backup Outbound ProxyGlobal Parameters Per-Line Parameters SIP Server SRV Lookup Enabling/Disabling the Contact Header Matching FeatureContact Header Matching Sip proxy ip Sip proxy port Select SIP Settings Configuring Basic SIP Authentication Settings Select SIP User Configure SIP authentication settings Configure Global Call Waiting Configuring Basic SIP Network Settings optionalConfigure Per-Line Call Waiting Configuring Proxy IP and Proxy Port Select SIP Register Enabling/Disabling the Use of the Registrar Server Select SIP Call Server Aastra Web UI Aastra Web UI Parameters Configuration File Parameters Advanced SIP Settings optionalSee , Configuring Advanced Operational Features See , Configuring Advanced Operational Features Tures Tures Features Configuring Advanced SIP Settings Global SIP Settings Global SIP Settings Value of 0 disables the blacklist feature RTP Port Real-time Transport Protocol RTP SettingsSip amr codec payload format Basic Codecs G.711 u-Law, G.711 a-Law, G.729 Default Codec SettingsBit Rate Algorithm Packetization Time Silence Suppression AMR-WB Mode Bit-Rate kbps AMR Mode Bit-Rate kbpsAMR Codec Modes AMR-WB G.722.2 Codec Modes Customized Codec Preference List Attribute Value Customized Codec Settings119 AMR-WB G.722.2 Preference Payload Codec RTP Encryption Out-of-Band Dtmf and Dtmf MethodDtmf Method Silence Suppression Configuring RTP Features For Click on Advanced Settings-Line N-RTP Settings Click on Advanced Settings-Global SIP-RTP SettingsEnter an RTP Port Base in the RTP Port field. Default is Global SIP Settings Configuring Rtcp Summary Reports Autodial SettingsRtcp Summary Reports Limitations Configuring Autodial Using the Aastra Web UI Configuring Autodial Using the Configuration FilesSip autodial number Sip autodial timeout Sip lineN autodial number Sip lineN autodial timeout Click on Advanced Settings-Line 1 9-Autodial Settings Per-Line Configuration Configuring the Configuration Server Protocol Configuration Server ProtocolSelect Configuration Server Select Download Protocol FTP Settings Tftp Settings Https Settings Http Settings Press Tftp Server Press FTP PasswordPress Tftp Path Press Alternate Tftp Server Press Http Server Select Configuration ServerPress Http Port Press Http Path Configuration Server Protocol Click on Advanced Settings-Configuration Server Tftp Select Operation-Reset and click Restart Chapter Configuring Operational Features About this Chapter About this Chapter User Passwords Operational FeaturesConfiguring a User Password Select User Password Click on Operation-User Password Select Lock Password Click on Operation-Phone Lock Resetting a User Password Changing the Administrator Password Administrator PasswordsLocking/Unlocking the Phone Lock the phone Locking/Unlocking the Phone Using the IP Phone UISelect Phone Lock Unlock the phone Configuring a Lock/Unlock Key Using the Configuration Files Locking/Unlocking the Phone Using the Aastra Web UISelect Lock Phone Lock Using the Configured Lock/Unlock Softkey on the IP Phone Configuring a Lock/Unlock Softkey using the Aastra Web UIClick on Operation-Softkeys and XML or Press the Lock softkey Phone locks Enter the user or administrator password and press Press the Unlock softkey Password prompt displays Defining an Emergency Dial Plan Configuring an Emergency Dial PlanEmergency Dial Plan and Pattern Matching Limitation Aastra Web UI User Dial Plan Setting Configurable Emergency Call BehaviorConfiguring Emergency Call Behavior Feature Method of configuration Configuring the SIP User Parameter Dial PlanTime and Date Daylight Savings Time DST Information Method Custom Configuration File Parameter DescriptionAbsolute Time not applicable to Eastern Standard Time EST Relative Time Custom Configuration File Parameter Description Example Operational Features Country Name Country Code Dhcp Dhcp Time Offset Option 2 Support Configuring Time and Date Using the IP Phone UI Configuring Time and Date Using the Configuration FilesCustom Time Zone Support Set Time Format Select Time Zone For 3-Line LCD Displays Set Time ZoneSet Daylight Savings Time Select Daylight Savings Press Date Format Press Set TimePress Time Zone Press a Daylight Savings time option. Valid values are Press Daylight Savings Set Daylight Savings Press To enter the Options ListPress the Save softkey to save your changes Time Servers Configuring Time and Date Using the Aastra Web UI Setting Time Server Using the IP Phone UI Setting Time Server Using the Configuration FilesEnable the Use Network Time setting To return to the previous screen To enable/disable Time Server Setting Time Server Using the Aastra Web UITo set Time Server 1, 2, and/or Configuring the Backlight Mode Using the IP Phone UI Backlight ModeSelect Preferences Select Display Select Backlight Display Setting BrightnessBrightness Level Setting Brightness Timer Brightness Timer Calibrate Screen 6739i only Background Image on Idle ScreenCalibrating the Screen Idle Screen Image Requirements for Configuring Background Image on Idle Screen Configurable Home/Idle Screen Modes Switching the 6867i IP Phone’s Home/Idle Screen Mode Picture ID Feature Configuring Dhsg Using the Configuration Files Configuring Dhsg on the PhoneConfiguring Dhsg using the IP Phone UI Audio Dhsg Headset Configuring Bluetooth Support Using the Configuration Files Configurable Bluetooth Support Wideband Audio Equalizer Audio Hi-Q on G.722 Calls Configuring Audio Transmit and Receive Gain Adjustments Audio Transmit and Receive Gain AdjustmentsParameter Description Live Dialpad Enabling/Disabling Live Dialpad Using the IP Phone UISelect Preferences Select Live Dialpad On 8 and 11-Line LCD phones Loading Language Packs LanguageAvailable Language Associated Language File Loading Language Packs via the Aastra Web UI Loading Language Packs via the Configuration File mac.cfg Select Language Specifying the Screen Language to UseSelect Screen Language Select the applicable language Navigate to the Language option and press Click on Basic Settings-Preferences-Language SettingsLoading the Language Pack Specifying the Input Language to Use English defaultKeypad Text/Character Input Tables Specifying the Language to Use in the Aastra Web UI Spanish French Italian German Russian Portuguese Nordic Configuring Language Input Using the Configuration FilesInput language Abc2åäæà Configuring Language Input Using the IP Phone UI Configuring Language Input for an XML Application Configuring Language Input Using the Aastra Web UIClick on Basic Settings- Preferences-Language Settings UTF- 8 Codec for Multi-National Language Support Locking IP Phone Keys Minimum Ringer Volume Locking the IP Phone Keys using the Configuration Files Prgkey5 locked Prgkey6 locked Locking/Unlocking the Save and Delete keysPrgkey1 locked Prgkey2 locked Local Dial Plan Symbol DescriptionPrefix Dialing Dial Plan Example SIP Dial Plan Terminator Digit TimeoutSecondary Dial Tone Sip dial plan Click on Basic Settings- Preferences-General Configuring Display Dtmf Digits Configuring Suppression of Dtmf PlaybackSuppressing Dtmf Playback Display Dtmf Digits Click on Operation-Reset Configuring Suppress Incoming Dtmf PlaybackFilter Out Incoming Dtmf Events Call Waiting Configuring Call Waiting Call Waiting Tone Call Waiting Tone Period Configuring Call Waiting Tone Click on Basic Settings-Preferences-General Configuring Call Waiting Tone Period Stuttered Dial Tone Configuring Stuttered Dial Tone XML Beep Support Configuring XML Beep Support Configuring Status Scroll Delay Status Scroll Delay Configuring Switch Focus to Ringing Line Switch Focus to Ringing Line Call Hold Reminder During Active Calls Configuring Call Hold Reminder During Active Calls Call Hold Reminder on Single Hold Configuring Call Hold Reminder Configuring Call Hold Reminder Timer Call Hold Reminder Timer & FrequencyConfiguring Call Hold Reminder Frequency Call hold reminder timer Call hold reminder frequency Configuring the Preferred Line and Preferred Line Timeout Preferred Line and Preferred Line TimeoutPhone Feature Preferred Line Behavior How it Works Goodbye Key Cancels Incoming Call For 8 and 11-line LCD phones Configuring the Goodbye Key to Cancel Incoming CallsFor 3-line LCD phones Configurable Status Code on Ignoring Incoming Calls Message Waiting Indicator LineConfiguring Message Waiting Indicator MWI Configuring Status Codes on Ignoring Incoming Calls Configuring Message Waiting Indicator MWI Request URI Customizable Message Waiting Indicator MWI Request URI Configuring the DND Key Mode DND Key Mode Phone AccountCustom Configuring Call Forward Key Mode Call Forward Mode For more information, see the section, Call Forwarding on Aastra Web UI Administrator Lldp Packet Interval Parameter Method of Configuration Who Can Configure Select Network Lldp Configuring LLDP-MED and Elin Outgoing Intercom Calls Incoming/Outgoing Intercom with Auto-Answer and Barge Incoming Intercom Calls Delay before Auto-AnswerMicrophone Mute Auto-Answer/Play Warning Tone Outgoing intercom Settings Configuring Intercom Calls SettingsFor Sylantro servers, enter *96 Incoming intercom Settings Group Paging RTP Settings Configuring Group Paging RTP Settings Speeddial Key Mapping Using the Configured Paging Key on the IP Phone Click on Basic Settings-Preferences Redial disabled Conference disabled Call transfer disabledEnabling/Disabling Redial, Xfer, and Conf Keys Mapping Redial and Conf Keys as Speeddials Send Dtmf for Remapping Conference or Redial Key Using Redial Key for Last Number Redial Configuration Method Valid Values Default Value Ring Tone Settings TableRing Tones and Tone Sets For global configuration only Configuring Ring Tones and Tone SetsRing Tone Sets Select Preferences Press To return to the previous menu or press For per-line configuration For global configurationIP Phone Handset Audio Mode Speaker Audio Mode Ring Tone via Speaker During Active Calls No Service Congestion Tone Priority Alerting Configuring the No Service Congestion ToneHow Priority Alerting Works Asterisk/Broadworks Servers Sylantro Servers Ring Tone PatternsRing Tone Pattern Asterisk/Broadworks Servers Ring Tone Pattern Sylantro Servers Bellcore Tone Pattern ID Cadence Mexican Tone Set CadencesTone Frequency Hz Cadence on/off Russian Tone Set Cadences Brazilian Tone Set CadencesMalaysian Tone Set Cadences Limitations for Malaysian Cadences Slovak Tone Set Cadences Italian Tone Set CadencesPeriod is set to Call Waiting Tones Configuring Priority Alerting using the Aastra Web UIFor Sylantro Servers Bellcore Call-Waiting Tone Pattern ID Directed Call Pickup Prefix optional Directed Call Pickup BLF or XML Call Interception300 330 Tone Off 100 110 Enabling/Disabling Directed Call Pickup Configuring BLF/BLF List for Directed Call Pickup For 8 and 11-Line LCD softkeys Configuring XML for Directed Call Pickup 103 IP Phone Model Softkeys Expansion Module Keys SoftkeysHandset Keys Available State-Based Softkeys Softkey Type Default States6735i, 6737i, 6863i, 6865i, and 6867i in Release 3.3.1 SP3 SoftkeyN states Configuration Example Softkey Idle Connected Programmable Keys Key Functions Table Softkey/Programmable Key/Expansion Module Key FunctionsTion Period on Tion ACD for Sylantro Servers on Pickup/Group Call Pickup on Programmable Configuration onComplete the call pickup. on Ing on Speeddial/Conference Key on Feature onSpeeddial/MWI Key on List on Keys on Configuring Softkeys and Programmable KeysTings on Operational states are not applicable to expansion modules For Softkeys and Expansion Module Keys Configuring Collapsed Context User Softkey Screen Option to Remove the More Softkey when Not RequiredShifting of Softkey Positions for Busy States For Programmable Keys L1 Thomas Keller 01/01/14 1100am Lock More Default Screen Cfwd Parameter Enabled Default Screen Default Screen Parameter Enabled Configuring the Collapsed More Softkey Screen Option Feature Key Programming Guidelines 6757i Cordless CT Feature KeysHandset Key Key Function Description Handset Feature Key Functions List empty Use web page to configure Handset Key Functions Table Grammable Configuration onPickup PickUp Tralized conferencing on the IP Phones RTP stream for example, when the call is not on hold Configuring Handset Feature Keys Click on Operation-Handset Keys Click Save Settings Configuring Press-and-Hold Speeddial Keypad KeysPress-and-Hold Speeddial Keypad Keys Click on Operation-Keypad Speed Dial 6867i Hard Key Mapping 6867i Hard Key Reprogramming 125 Configuration Parameter Description Softkey selection list Feature key selection list Customizing the Key Type List Using the Configuration FilesCustomizing the Key Type List in the Aastra Web UI Enabling/Disabling Ability to Add or Edit a Speeddial Key Speeddial PrefixesBusy Lamp Field BLF BLF/List Setting BLF Setting BroadSoft BLF Configuration Asterisk BLF ConfigurationConfiguring BLFs 131 BLF Page Switch Feature Ring Signal Type for BLF Configurable Display for Blank BLF/List SoftkeysConfiguring BLF Page Switch Configuring the Display for Blank BLF/List Softkeys 134 State Behavior Configuring Ring Splash Settings Ring Signal Type for BLF/ListConsiderations For Softkeys ExamplesFor Programmable Keys For Top Softkeys BLF Subscription Period Configuring BLF Subscription Period BLF/Xfer and Speeddial/Xfer Keys Speeddial/Xfer Key Requirements and Functionality BLF/Xfer Key Requirements and Functionality Top Softkey Parameters Examples States are not applicable to programmable keys Speeddial/Conference Key Limitations for Speeddial/Conference Key Configuring the Speeddial/Conf Key Using the Aastra Web UI Speeddial/MWI Key 146 Configuring a Speeddial/MWI Key Using the Aastra Web UI 148 Configuring an Automatic Call Distribution ACD Key ACD Auto-Available TimerAcd auto available Acd auto available timer Automatic Call Distribution ACD for Sylantro Servers Configuring an ACD Key Using the Aastra Web UI Configuring the ACD Auto-Available TimerType field, select Auto Call Distribution Using the ACD Feature on your IP Phone Logging In to a Phone Queue Configuring ACD Subscription PeriodACD Subscription Period Press the ACD key on your IP phone Directed Call Pickup/Group Call Pickup Configuring Directed Call Pickup DCP Using the Aastra Web UI Configuring DCP/GCP Using the Configuration Files Using Directed Call Pickup/Group Call Pickup Configuring Group Call Pickup GCP Using the Aastra Web UIUsing Directed Call Pickup DCP Using Group Call Pickup GCP Do Not Disturb DND DND Account-Based ConfigurationMWI LED OFF if current account in focus has DND OFF Configuring DND Using the Configuration Files DND on for all accounts, or turn DND OFF for all accounts Configuring DND Using the Aastra Web UI Click on Basic Settings-Account Configuration DND in Account Mode Configuring DND via the IP Phone UI 3-Line PhonesDND in Phone Mode Default IP Phone UI DND in Custom Mode DND DND Configuring DND Modes via the IP Phone UI DND Status Icon DND Softkey 165 166 Configuring DND Using the IP Phone UI Bridged Line Appearance BLA Configuring BLAIP Phone Model Possible # of BLA Lines Per-Line BLA Global BLA Configuring Per-Line BLA Using the Configuration Files Configuring Global BLA Using the Configuration Files For global configuration of BLA Configuring BLA Using the Aastra Web UIFor per-line configuration of BLA Click on Advanced Settings-Line N BLA Subscription Period Configuring the BLA Subscription Period BLA Support for Third-Party Registration Using a BLA Line on the IP Phone Preferred Identity Header for BLA Accounts BLA Support for Message Waiting Indicator MWI Configuring BLA Support for MWI Using the Aastra Web UI Keys States and LED Behavior Shared Call Appearance SCA Call Bridging Softkey Line Keys Line Keys and Idle Screens9143i Phone LED States State LED for Local Line Key Phone Behavior Enabling/Disabling SCA Call Bridging Feature6867i Softkeys State Park/Pickup Static Configuration Park/Pick Up Static and Programmable ConfigurationHow it Displays on the Phone Sprecode Pickupsprecode Park/Pickup Call Server Configuration ValuesServer Park Values Pickup Values Asterisk Sylantro BroadWorks Click on Basic Settings -Preferences -General Park/Pickup Programmable Configuration Using a SoftkeyFor 8 and 11-Line LCD Phones Server Park Configuration Pickup Configuration Configuring Park/Pickup Key Using Configuration FilesOn 8/11-Line LCD Phone and 6739i and 6867i Phone UIs On 3-Line LCD Phone UIs Examples for Models with 3-Line LCDs Call Park/Pickup Configuration Precedence Rule For 8/11-Line LCD Phones, 6739i, Configuring a Park/Pickup Key Using Aastra Web UIClick on Operation-Softkeys and XML Label field, enter a label for the park softkey Click on Advanced Settings Line 1 you can select any lineFor CT Handsets For 3-Line LCD phones 6731i Screen Click on Operation-Programmable Keys Using the Park Call/Pickup Parked Call Feature Use Case Scenario Click on Advanced Settings -Global SIP or Line # Last Call Return lcr Sylantro Servers Configuring Last Call ReturnFor the 6755i & 6757i/6757i CT For the 6757i CT Handset Pick a handset key to configure for Last Call ReturnKey Function field, select Last Call Return Focus Call Forwarding Configuring Call Forwarding 194 195 Configuring Cfwd via the IP Phone UI 3-Line Phones Cfwd Mode All Off Done Change All On Cfwd in Account Mode OFF 4Change Done Change No. Rings Next Set John Smith Cfwd All Tue Aug 20 255pm Cfwd in Phone Mode 201 202 Cfwd in Custom Mode 204 205 Using Cfwd via the IP Phone UI 8-Line and 11-Line Phones Call Forward Mode All Busy State OFF All Off 210 Call Forward Screenname1 Screenname2 Screenname3 Change 212 213 Configuring Cfwd via the IP Phone UI Use Call Forward Account Mode Call Forward Phone Mode Call Forward Custom Mode Configuring Call Forward via the IP Phone UI Forward mode Press the Save softkey to save your changes Press the configured Call Fwd softkey or pressNavigate to the Call Forward option and press 220 SIP Phone Diversion Display Configuring SIP Diversion Display on the PhoneDisplay Name Customization Call Diversion Example Pattern Rules and Syntax Configuring the Display Name Customization Feature Callers List Displaying Call Destination for Incoming CallsBehavior of the Phone Callers list disabled Using the Callers ListEnabling/Disabling Callers List You selected That were missed callsButton. The Directory displays Creating Customizable Callers List and Services Keys Customizable Callers List and Services KeysServices script Callers list script Downloading the Callers List Enabling/Disabling Missed Calls Indicator Missed Calls IndicatorAccessing and Clearing Missed Calls Missed calls indicator disabled Directory List Administrator/User Functions for Directory ListDirectory List Capabilities Enabling/Disabling Directory List Directory disabledServer to IP Phone Download Character Description Directory List Limitations Server to IP Phone Download BehaviorDirectory List Limitations To dial from an entry in the Directory List Using the Directory ListTo add a new entry to the Directory List To edit an entry in the Directory List From the CT handsets To delete all entries from the Directory List Dialing from the Directory Using the Search Feature in the DirectoryAdding an Entry Deleting an Entry Editing an EntryBers/labels to the Directory on your phone Directory Downloading from the IP Phone to the Server Downloading from the Server to the IP PhoneDeleting a number and/or label from an entry Local Directory Loose Number Matching Configuring Local Directory Loose Number Matching Customizable Directory List Key Configuring VoicemailVoicemail Creating a Customizable Directory List Key When you have selected a line item, press Using VoicemailPress Key or Configuring SCA Voicemail Visual Indicators Visual Indicators for Voicemail on SCA-Configured Lines #feature code*PIN# PIN and Authorization Code Suppression Creating Customized XML Services on the IP Phones XML Customized ServicesXML Object Description Attribute/Option Description/Usage Valid Values XML Configuration Push from the Server Scroll Delay Option for Status MessagesEnabling/Disabling a Beep for Status Message Displays XML Get Timeout Configuring the Phone to use XMLXml application URI Xml application title XML Push Requests Example Configuration of XML Application Configuring for XML on the IP Phone Click on Operation-Programmable Keys 6753i Screen No posting is performed if a session times out Select Custom Features Using the XML Customized Service Custom Features screen Press Custom FeaturesAction URIs Action URIs and Associated Variables Again when registration is already in a timeout stateEters Tings-Action URI Applicable Variables For more information, see Polling Action URIs on Variable DescriptionsVariable Description Current line state associated with TimeoutIP Address associated with Remote number associated with Click on Advanced Settings-Action URI Configuring XML Action URIs 253 Configuring Polling Action URI via the Aastra Web UI Configuring Polling Action URI via the Configuration FilesAction uri poll Action uri poll interval Action URI Connected Configuring the Action URI Connected Feature Local phone is ringing Call was missed or cancelled Remote party is ringing Call was cancelledAction URI Disconnected Phone is idle Parties are talking Call was successful Configuring the Action URI Disconnected FeatureCall was released but not acknowledged XML SIP Notify Events Click on Advanced Settings-Action URI-Event Example of a SIP Notify without XML Content Example of a SIP Notify with XML Content Enabling/Disabling the XML SIP Notify Feature Enabling/Disabling XML SIP Notify Using the Aastra Web UISip xml notify event Action uri xml sip notify XML Softkey URI Configuring XML Softkey URIs You can use the following variables in the URI Hard Keys/Options Redirects XML Key Redirection Options Key Redirection Configuring XML Redirection of the Options KeyXML Applications and Off-Hook Interaction Options script XML Override for a Locked Phone Configuring the Off-Hook Interaction FeatureXML URI for Key Press Simulation Xml lock override Configuring Indication of Terminated Calls Configurable Indication of Terminated Calls Handling Call Termination Screens on the Phone UI Centralized Conferencing for Sylantro and Broadsoft ServersGlobal Parameter Per-Line Parameter Conference Broadsoft server Configuring Centralized Conferencing Using the Aastra Web UI 270 Limitations of the SIP Join Feature SIP Join Feature for 3-Way ConferenceCustom Ad-Hoc Conference Custom adhoc conference Configuring Conference/Transfer in Live Dial Mode Conference/Transfer Support for Live Dial ModeConfxfer live dial Using the IP Phone when Broadsoft CMS is Enabled 274 Expansion Module 2 3 pages Expansion Module 1 3 pagesExpansion Module 3 3 pages Customizing the M675i Expansion Module Column Display Chapter Configuring Advanced Operational Features About this Chapter Feature Description Advanced Operational FeaturesMulti-Stage Digit Collection Billing Codes Support for Sylantro Servers TR-069 Support MAC Address/Line Number in Register Messages Configuring the MAC address/Line Number in Register MessageSip send mac Sip send line Click on Advanced Settings-Global SIP-Advanced SIP Setting Configuring SIP Message Sequence for Semi-Attended Transfer Configuring SIP Message Sequence for Blind TransferSIP Message Sequence for Blind Transfer SIP Message Sequence for Semi-Attended Transfer Boot Sequence Recovery Mode Update Caller ID During a CallConfiguring Update Caller ID During a Call Configuring Boot Sequence Recovery Mode Single Call Restriction Auto-discovery Using mDNS Missed Call Summary Subscription Configuring Single Call Restriction How it Works on the Phone UI As-Feature-Event SubscriptionGlobal Parameters Sip lineN missed call summary subscription Click on Advanced Settings-LineN-Advanced SIP Settings Blacklist Duration Sip blacklist duration Configuring a Server Blacklist Using the Aastra Web UI Whitelist Proxy Configuring Whitelist Proxy Using the Configuration FilesSip whitelist Transport Layer Security TLS Configuring Whitelist Proxy Using the Aastra Web UI Advanced Operational Features Configuring TLS Using the Configuration Files Click on Advanced Settings-TLS Support Configuring TLS Using the Aastra Web UI Certificates and Private Key Information Select Network Settings-Ethernet & VLAN-802.1x Settings Configuring the 802.1x Protocol Using the IP Phone UIOn 3-Line LCDs Advanced Operational Features Press Network Press EAP-TLS SettingsPress Ethernet & Vlan Press 802.1x Support Select Network Press Network Click on Advanced Settings-802.1x Support Configuring the 802.1x Protocol Using the Aastra Web UITo configure EAP-MD5 To configure EAP-TLS Symmetric TLS Signaling Symmetric UDP SignalingSip symmetric udp signaling Sips symmetric tls signaling Configuring UserAgent/Server SIP HeadersRemoving UserAgent and Server SIP Headers Sip user-agent Gruu and sip.instance Support Limitations of the Gruu FeatureBilling Codes Implementation Notes Mandatory versus Optional Billing Codes Numbers Not Requiring Billing Codes Configurable DNS Queries Configuring the DNS Query Method Ignore Out of Sequence ErrorsConfiguration DNS Server Method Used Description File Value Sip dns query type Enable Microphone During Early Media Switching Between Early Media and Local RingingEarly-Only Parameter in Replaces Header RFC3891 Enabling/Disabling Out of Order SIP Requests Reason Header Field in SIP Message Configurable Allow and Allow-Event Optional HeadersCall Failed Message Enabling/Disabling Optional Allow and Allow-Event Headers Enabling/Disabling P-Asserted Identity PAI Configurable SIP P-Asserted Identity PAISip pai Configurable Compact SIP Header Configurable Route Header in SIP PacketReject INV or BYE when Unsupported Value in Require Header Enabling/Disabling the Compact SIP Headers Feature Enabling/Disabling a Rejection of the INV or BYE XML URI for Key Press SimulationXML Key URI Description Line Keys Keypad Keys Feature Keys Volume KeyXML Key URI Description Navigation Keys For XML Post Messages Domain Name System DNS Server Pre-caching SupportFor XML Key Scripts Configuring DNS Service SRV Records Pre-caching Configuring DNS Host Pre-cachingSip dns srvX name Sip dns srvX priority Sip dns srvX port Sip dns srvX target Hostfile.txt Sip dns srv1 name sip.udp.example.com Configuring DNS SRV Record Pre-caching SIP Services Configurable Alphanumeric Input Order for Username PromptsSip services transport protocol Sip services port Rtcp Summary Reports Parameter is set to 0 uppercase letters first by default Line LCDs Active Voice-over-IP VoIP RecordingNormal Call Lewis Button Martin Croft Configuration Parameters Filter Softkey for the Executive’s Phone Filter Softkey Colon i.e. #61*61 or #61#71 respectively Filter Softkey for the Assistant’s Phone For Expansion Module Softkeys Advanced Operational Features Advanced Operational Features Topsoftkey1 type speeddial Topsoftkey1 label Init For Expansion Module Softkeys Chapter Encrypted Files on the IP Phone Encrypted Files on the IP Phone Configuration File Encryption Method Anacrypt Switch Description Procedure to Encrypt Configuration Files\anacrypt -i -p 1234abcd Vendor Configuration File Encryption Configuring Vendor Configuration File Encryption Chapter Upgrading the Firmware Upgrading the Firmware Using the Firmware Update Page in the Aastra Web UI IP Phone Model Associated Firmware Click on Advanced Settings-Firmware Update To cancel the Restart, press the 3 key Using the Restart FeatureThis field is not applicable to the Tftp and FTP protocols Click Download Firmware Using the Auto-Resync Feature Mode Time 24 hours Maximum Delay Days Enabling Auto-Resync Using the Configuration Files Click on Advanced Settings-Configuration Server-Auto-Resync Enabling Auto-Resync Using the Aastra Web UI Chapter Troubleshooting Log Settings TroubleshootingModule/Debug Level Settings Log module stun Setting Values for the Module/Debug LevelsDebug Level Value Get local.cfg Get server.cfg Show Task and Stack Status Support Information Click on Advanced Settings-Troubleshooting Performing Troubleshooting TasksTo set log settings Restart Phone field click Restart to restart the IP phone WatchDog Task FeatureTo set blog modules To perform support tasks Enabling/Disabling WatchDog Enable/Disable WatchDog Task Viewing the Error Messages Using the IP Phone UI Error Messages DisplayPossible Error Message Description Select Phone Status Select Error Messages Viewing the Error Messages Using the Aastra Web UI Configuration and Crash File RetrievalClick on Advanced Settings-Troubleshooting-Error Messages For example, 00033D0001112010-02-270204pmcrash.cfg For example, 00043D1993452010-02-261030amlocal.cfgMethod for Retrieving Description Support Info For 8 and 11-Line Phones Click on Status-System Information- Support Information Why does my phone display Application missing? Troubleshooting SolutionsWhy does my phone display the No Service message? Reason Why does my phone display Bad Encrypted Config?Fix How do I restart the IP phone? Select Factory Default How do I set the IP phone to factory default?Press Factory Default For 3-Line LCD Displays Select Erase Local Config How do I erase the phone’s local configuration?Press Erase Local Cfg Press Password How to reset a user’s password? Press the Re-enter Password field How do I lock and unlock the phone? Select Lock Phone Lock This appendix covers the following topics Appendix a Configuration Parameters About this Appendix About this Appendix About this Appendix About this Appendix About this Appendix Operational, Basic, and Advanced Parameters Setting Parameters in Configuration Files Simplified IP Phone UI Options Menu Parameter Configuration FilesDescription For Description For Default ValueFormat Range Option Example Parameter Configuration Files0.0 0.1 Default Value Range Disable Enables or disables the PC portPc port passthru enabled Receive data over the LAN Option Dhcp Option Settings Dhcp option 132 vlan id enabled Options 132 Transfer Vlan ID Assignment Using DhcpOptions 159 and 160 Dhcp Option Override 159 Allows you to set a new user password for the IP phone Admin passwordDefault value is an empty string left blank User password Emergency Call Behavior Settings Emergency Dial Plan Settings Aastra Web UI Settings Option Tftp path configs\tftpDownloading to the IP Phone Up to 256 alphanumeric characters Default Value Range Example Alternate tftp path configs\alternateFollowing parameters for setting username and password Server for downloading to the IP Phone Configuration file has been downloaded into the phone Ftp path configs\ftpLoading to the IP Phone Up to 63 alphanumeric characters Http path name to enter Parameter http pathEntered in this field Dir/dir/dir Https path name to enter Parameter https pathHttps path ipphones/6755i Over Https Files When the phone becomes idleResync time is based on the local time of the IP phone Minute increments only Format 00h00 configuration files only0200 Additional Information Multiple Configuration Server SettingsDownload occurs to the phones from the specified server Support signals 0-9, # Network Address Translation NAT SettingsFollowing Dtmf tones are supported Support durations up to 5 seconds Local SIP UDP/TCP Port Setting Rport SettingAddress Translation NAT or firewall Local SIP TLS Port First is the primary and the second is the backupSIP Stun Parameters Aastra.cfg, model.cfg, mac.cfg SIP Turn Parameters First is the primary and the second is the backupParameters Stun does not work if the NAT device is symmetric One 1 or two 2 port numbers separated by a comma 3479Sip turn port 3479,3480 Sip turn pass 42447208233b8b8b8a234 SIP Keep Alive Support Https Client and Server SettingsThis is only for UDP transport protocol Disables blocking of XML Http POSTs Https Server Certificate Validation SettingsEnables blocking of XML Http POSTs Use of the https// URL Set for the phone to accept the certificates Expired prior to accepting the certificate Accept the User-provided certificates Vlan tagging i.e. the tagging enabled parameter is enabled Virtual Local Area Network Vlan SettingsGlobal Parameters False To 63 for Dscp To 7 for SIP, RTP, and Rtcp priorities LAN Port Ethernet Port 0 ParametersTos priority map 26,7 PC Port Ethernet Port 1 Parameters Parameter Configuration FilesDscp Range Dscp Priority Range Example Enabled on Disabled OFFSpecifies whether or not to send of Rtcp summary reports Sip rtcp summary reports Line Parameters Type of Service ToS/DSCP Settings Time and Date Settings Configuration setting and the current timezone settings Time Zone and DST Settings on page A-47Is disabled Time Zone Name Time Zone Name Time Zone Code Time Zone Name/Time Zone Code Table CA-Atlantic CA-NewfoundlandCA-Eastern CA-Saskatchewan LI-Vaduz LC-St LuciaLT-Vilnius LU-Luxembourg Time Server Settings For time server2 will be used to request the time from Custom Time Zone and DST Settings Range Example Absolute Time Day of the month that DST ends. Valid values are 1 to Day of the month that DST starts. Valid values are 1 to Relative Time = third full week of month Tive integer from 1 to=third last occurrence dst start day in the month = fourth full week of month Sunday An integer from 1 toMonday Tuesday Backlight Mode Settings Brightness Level Settings Secondary screen mode Primary screen modeIdle screen mode Tftp//server/image.png Entering no value for this parameter disables this feature Dhsg Settings Wideband Audio Equalizer Settings Bluetooth Support Settings SIP Local Dial Plan Settings Live Dialpad Settings Enabled # sent as %23 in dial string Disabled # used as a dial plan terminatorMust press consecutive keys before the timeout occurs Sent as %23 to the proxy in the dial string Contact Header Matching SIP Outbound SupportTransport SIP Global Authentication Settings SIP Basic, Global SettingsDisplay Web UI troubleshooting page for debug purposes Password used to register the IP phone with the SIP proxyMask sip password Tem Call activity can go to more than one phone Generic Normal lineBLA Bridged Line Appearance BLA line Generic Call Waiting Settings 4294967295 SIP Global Network SettingsTargeted user Proxy servers port number Mary SIP proxy is unavailable Backup proxy’s port numberYour network, then you would normally set its address here Sage waiting indicator MWI does not come on Can dial using username@ip address of the phoneYou can dial using username@ip address of the phone Message waiting indicator MWI does not come on Ure the sip backup outbound proxy on a global basis Backup Outbound Proxy Global SettingsSip backup outbound proxy drax.us.aastra.com Bound proxy port on a global basis SIP Per-Line Authentication Settings SIP Basic, Per-Line SettingsScreen Name 2 value does not display Characters are allowed such as # Sip line1 display name Joe Smith Sip line1 user nameRequest Sip line1 auth name Above example on Phone Sip line1 mode SIP Per-Line Network Settings SIP Per-Line Call Waiting Setting Sip line1 backup proxy port Sip line1 backup proxy ipSip line1 proxy port Sip line1 registrar port Sip line1 registrar ip Sip line1 backup registrar port Sip line1 backup registrar ipSip line1 registration period BLA Support for MWI Backup Outbound Proxy Per-line SettingsMwi subscription period parameter to re-subscribe Playing MWI does not change Per-Line Setting Global SettingSCA-configured line Sip sca bridging Conf@mediaserver address mediaport Centralized Conferencing SettingsExamples Description Conference/Transfer in Live Dial Mode Server to send the default profile to the phone HTTP/HTTPS Authentication Support for Broadsoft CMSSpecify domain names i.e., user@domain Eters To disable Advanced SIP SettingsTo enable 86400 This timer is a SIP transaction layer timer defined in RFC Minimum session timer isConnected sessions. See RFC4028 for details 90 + This parameter implies keep-alive mechanism Certificate, the Private Key, and the Trusted CertificatesTings on page A-89 Other than 408 timeout or 503 service unavailable Or 503 service unavailable error codeRenewal would be sent at the half-way point as 100/2 Phone uses the default value of 300 seconds Reboot of the IP phone120 3700 Indicator is incremented on phone B Missed Call Summary Subscription SettingsAbove example Sip missed call summary subscription Per-Line Parameter As-Feature-Event Subscription Settings Key files are optional Transport Layer Security TLS Settings Your IP phone, contact Aastra Technical Support Following example downloads no local certificate file Port protocol to setup a callServer Sips local certificate phonesLocalCert.pem Phone, contact Aastra Technical Support Tificate in its Trusted Certificate file Transport protocol to setup a callFile name.pem Following example downloads no trusted certificate file Eap type Identity Md5 password Pc port passthrough enabled 802.1x Support SettingsEap type Identity 802.1x private key Advanced Settings Advanced Settings-802.1x Support-General-IdentityMd5 password password1 Identity phone1 Path directory on server 1.2.3.4 using port From the original configuration serverCatesftp//adminadmin!@1.2.3.450/path/phones802RootCert.pem 802.1x root and intermediate 802.1x local certificate phones802LocalCert.pem Server 1.2.3.4 using port802.1x private key filename.pem 802.1x trusted On server 1.2.3.4 using portDo not specify a filename, the download fails 802.1x trusted certificates phones802TrustedCert.pem Global Settings RTP, Codec, Dtmf Global Settings Sip amr wb codec mode set Aastra.cfg, model.cfg mac.cfg Sip amr codec mode set 2,1,0,3,4Sip amr wb codec mode set 2,1,0 Modes are supported by both sides Payload Value will be usedSilsupp on, off Parameter Take effect Per-Line Settings Any valid SIP number Blank Empty field Disables autodial on this lineNumber after the handset is lifted from the IP phone cradle Sip line1 autodial number Play shows List Empty Voicemail Settings SCA Voicemail Indicator Settings Directory Settings Services menu Enables or disables the Directory on the IP phoneDirectory disabled Directory 2companylist.csv Example Callers List Settings Call Forward Settings Customizable Callers List and Services Key Phone behaves as if the mode was set to Phone Call Forward Key Mode Settings LLDP-MED and Elin Settings Ess From Lldp as a caller ID for emergency numbersSend all LLDP-MED Inventory Management TLV sets Do not send any LLDP-MED Inventory Management TLV sets XML Settings Missed Calls Indicator Settings You to change that title ONThe phone beeps when an XML object with the beepIces-4. Traffic Reports Xml application title Traffic Reports Unique line configured on the phone Action URI SettingsChanges to this parameter are applied immediately Action uri registration event http//10.30.100.39/PHP Any valid URI Action uri offhook http//10.50.10.140/offhook This parameter can use the following variablesTion in call records and billing applications Action uri onhook http//10.50.10.140/onhook Polling Action URI Settings XML SIP Notify SettingsSip xml notify event parameter must be enabled Untrusted server, the phone rejects the message Ring Tone and Tone Set Global Settings Ring Tone via Speaker During Active Calls Settings Ring Tone Per-Line SettingsLineN is applicable to lines 1 through During Active Calls on page 5-90for more information Status Code on Ignoring Incoming Calls No Service Congestion Tone Settings Call Hold Reminder Settings After 60 seconds determined by this parameter Preferred line timeout Stuttered Dial Tone Setting Message Waiting Indicator Request URI Setting Message Waiting Indicator SettingsTor Line field Priority Alert Settings DND Key Mode SettingsKey/Hard Key Parameters on page A-156 For Sylantro Server only Alert community 4 Alert community 3 Ured Bellcore ring tone is applied to the IP phone Bellcore Cadence Settings SIP Diversion Display Quotation marks must be used when defining the pattern Display Name Customization SettingsDisplay of Call Destination for Incoming Calls Use to specify multiple or combined patterns Values 1-2 can only be set to either French or Spanish Language SettingsAbout loading language packs, see Loading Language Packs on Français Guages specifiedDeutsch Italiano See examples for each below Language Pack SettingsLangISO 639ISO 3166.txt LangISO 639.txt Language Codes from Standard ISO Language 1ftp//adminadmin!@1.2.3.450/path/langde.txtLanguage Language Code Country Country Code Country Codes from Standard ISO Dhcp see , the section, Dhcp Time Offset Option 2 Support on Operational, Basic, and Advanced Parameters 141 Vatican City State See Holy see Display Dtmf Digits Setting Suppress Dtmf Playback SettingNo digits display when dialing Zaire Outgoing Intercom Settings Intercom, Auto-Answer, and Barge In Settings Incoming Intercom Settings False microphone is not muted Nating callerTrue microphone is muted Call on an active line Enables mic during early media Enables or disables the microphone while in early mediaDisables mic during early media Sip early media mute mic Deployment environment Audio Transmit and Receive Gain Adjustment SettingsDb to +10 db Fort level and deployment environment Audio mode Disable User Login to Aastra Web UISpecifies whether or not to disable the web user interface It up again Directed Call Pickup BLF or XML Call Interception Settings Terminated Calls Indicator Ple, *981234 where prefix key = *98, extension = ACD Auto-Available Timer SettingsSymbol characters are allowed for example Tored extensions Redial disabled Mapping Key SettingsConference disabled Call transfer disabled Not configured for speeddial Set is not configured for speeddialMethod when the Redial key is pressed Map redial as dtmf1 Comma amounts to approximate 500ms Park and Pickup Settings Sylantro*98 Asterisk70BroadWorks*68 Inin PBX callpark Model Available IP Phone Softkeys Expansion Module Keys 6865i 16 to Model M680i 6867i Top and Bottom Softkeys Softkey Settings Group Call Pickup on groupA Directed Call Pickup on Extension SoftkeyN label parameter, the label of Flash is used Status of the line Phone Aastra.cfg, model.cfg, mac.cfgSoftkey For line the value is optional for example L4 List Lines available is dependent on the specific IP phone modelSoftkey2 line Display on the idle screen at all States Are configured forOutgoing Collapsed context user softkey screen1 Increase of Displayed Characters for Softkey Line Labels Line icon disabledNo ellipsis characters will appear Users agents Programmable Key SettingsSP3 Call is not on hold Prgkey3 type speeddial Play for a specific key On the phone This is the value you assign to the programmable key Prgkey4 line Prgkey3 line Top Softkey Settings Topsoftkey2 type speeddial Topsoftkey1 type lineTopsoftkey3 type lcr Topsoftkey4 type xml TopsoftkeyN label parameter, the label of Flash is used Indicates the status of the lineTopsoftkey1 label Line Topsoftkey2 label info Description This is the value you assign to the softkey TopsoftkeyN value Press-and-Hold Speeddial Keypad Key Settings Handset Feature Key Settings Featurekey2 label Public Featurekey1 label LineFeaturekey4 label John Smith Current language of the cordless handset Expansion Module Key Settings for M670i , M675i, and M680i For a specific key Multicast addresses without involving SIP signalingExpmod1 key1 type line Expmod1 key2 type speeddial ExpmodXkeyN label parameter, the label of Flash is used Cates the status of the line ExpmodX keyN value Expmod1 key2 line Expmod1 key1 line Hard Key Settings for 183 Pad on the phone Value parameter can be set for the following key types onlyKey Softkeys, Programmable Keys, Expansion Module Keys Customizing the Key Type List Softkey selection list blf, speeddial, line, xml Any of the key types in the Default Value field above Locking Keys Handset Feature Keys for CT Models onlyLabel, softkeyN value, softkeyN line, softkeyN states TopsoftkeyN label, topsoftkeyN value, topsoftkeyN line FeaturekeyN labelValue, prgkeyN line Value and hardkeyN line PnhkeypadN value and pnhkeypadN line Items on the IP phone Locking the Save and Delete KeysUnlock Delete items on the IP phone Prgkey5 locked Tion filesPrgkey6 locked BLF Page Switch BLF List URI SettingsEnabling/Disabling Ability to Add/Edit Speeddial Keys Ring Splash Settings Phones only Range Example For BLF For BLF/List SoftkeyN ring splash Softkey1 ring splash TopsoftkeyN ring splash Topsoftkey1 ring splash ExpmodX KeyN ring splash Expmod1 key1 ring splash Range For BLF For BLF/List Default Value For BLF For BLF/ListExample For BLF If defined as 0, the ring splash is played immediately Ring splash volumeSet to a periodic alerting pattern Expansion Module 1 through Customizing M675i Expansion Module Column DisplayExpansion Module Semi-Attended Transfer Settings Blind Transfer SettingUpdate Caller ID Setting Advanced Operational Parameters Single Call Restriction Setting Boot Sequence Recovery Mode Settings Whitelist Proxy Setting Blacklist Duration SettingAvailable for this amount of time 300 5 minutes Starting the Voicemail application Off-Hook and XML Application Interaction Setting Options Key Redirection SettingXML Override for a Locked Phone Setting Symmetric TLS Signaling Setting Symmetric UDP Signaling SettingThis parameter should be disabled according to M5T On the phone via configuration files or web user interface DNS Query SettingAddress of the proxy Optional Allow and Allow-Event Headers Ignore Out of Order SIP RequestsAsserted Identity PAI Compact SIP Header Route Header in SIP PacketRejection of INV or BYE Network attempts to add itself to the route it will fail DNS Host File Configuration Encryption SettingDNS Server Query Entering the host file name Ture in a future release Ues from 1 to Rtcp summary reports is set to UDP Alphanumeric Input Order for Username Prompts Ing feature is disabled Active VoIP Recording Settings Recording periodic beep Being recorded should be playedShould be played Local Call feature Feature#63 Sip execassist fac call push #63 IP phone to the IP address location Troubleshooting ParametersAny valid IP port Log server port Fatal Errors Default Init Functions Info All debug levels Fatal errorsParameters All Debug Levels 65535 223 Crash File Retrieval WatchDog Settings Upload system info on crash To the pre-defined server IP Phone at the Asterisk IP PBX B-2 IP Phone at the Asterisk IP PBX Exten 1234,1,DialSIP/phone1,20 Appendix C Sample Configuration Files About this Appendix # Phone Model 6757i Sample Configuration File # Dhcp Setting # NAT Settings # Dial Plan Settings # General SIP Settings # Per-line SIP Settings # DND Key softkey4 type dnd softkey4 label DND # Phone Model 6757iCT 6757i CT Sample Configuration File # Time Server Settings # Configuration Server Settings Can be used with a to represent a # General SIP Settings # Per-line SIP Settings # Softkey Settings # Cordless Handset Feature Keys Sample Configuration Files # Example configuration key list version Sample Configuration Files 6753i Sample Configuration File # ============= #dhcp 1 # Dhcp enabled # NAT Settings # Dial Plan Settings Sip # Programmable Key Settings Sample Configuration Files Appendix D Sample BLF Softkey Settings About this Appendix Asterisk/sipXecs BLF Softkey Configuration Parameters for Asterisk/sipXecs BLF BroadSoft BroadWorks BLF Multiple Proxy Server Configuration E-2 Multiple Proxy Server Configuration Warranty Repair Services Limited WarrantyAfter Warranty Service Exclusions Repair Notice Limited Warranty Australia Only Limited Warranty Australia Only Index Configuration Config serverContrast Dial plan Intercom settings, outgoing Intercom settings, incomingKey mapping Paging RTP OptionsParameters Park/pickup Passwords SIP settings Priority alerting settingsSIP settings, network Priority alerting Tx/Rx adjustments SIP Settings, RTPType of service Volume Index-8 Expat XML Parser Third-Party Copyright ComplianceM5T SIP Stack M5T OpenSSL License IssuesOpenSSL License Original SSLeay License LibSRTP Srtp Cisco UPnP Intel Wind River Systems VxWorks software Copyright-6 Disclaimer