Aastra Telecom 41-001343-02 manual Customizable Message Waiting Indicator MWI Request URI

Operational Features

Aastra Web UI

1.Click on Basic Settings-> Preferences->General.

2.In the “Message Waiting Indicator Line” field, select a single line from 1 to 9, or select “All” for all lines. If you select a single line, the MWI illuminates when a voicemail message is pending on that line. If you select all lines, the MWI illuminates when a voicemail message is pend- ing on any line from 1 to 9.

3.Click Save Settings to save your changes.

Customizable Message Waiting Indicator (MWI) Request URI

In Release 3.1 and up, an Administrator can enter a parameter in the configuration files to customize the request-URI for MWI feature subscription. This parameter is called “sip linex mwi request uri”.

This feature can be set on a per-line basis using the configuration files only.

Note:

“Sip Explicit MWI Subscription” must be enabled to use this feature. For more information about the Sip Explicit MWI Subscription” parameter, see “Advanced SIP Settings (optional)” on page 4-69.

Configuring Message Waiting Indicator (MWI) Request URI

Use the following procedure to configure an MWI request URI on the IP phone.

Configuration Files

For the specific parameter you can set in the configuration files, see Appendix A, the section, “Message Waiting Indicator Settings” on page A-126.

5-72 41-001343-02 REV04 – 05.2014