Aastra Telecom 41-001343-02 If a user is accessing the Aastra Web UI, they are not, Entered as

			Administrator Level Options
Parameter In	Parameter in	Parameters in Configuration	Description
IP Phone UI	Aastra Web UI	Files
Auto-Resync Settings
N/A	Mode	auto resync mode	Enables and disables the phone to be updated automatically
			once a day at a specific time in a 24-hour period. This param-
			eter works with TFTP, FTP, and HTTP servers.
			Notes:
			• If a user is accessing the Aastra Web UI, they are not
			informed of an auto-reboot.
			• Any changes made using the Aastra Web UI or the IP phone
			UI are not overwritten by an auto-resync update. Auto-
			resync affects the configuration files only. However, the
			settings in the Aastra Web UI take precedence over the IP
			phone UI and the configuration files.
			• The resync time is based on the local time of the IP phone.
			• If the IP phone is in use (not idle) at the time of the resync
			check, the reboot occurs when the phone becomes idle.
			• The automatic update feature works with both encrypted
			and plain text configuration files.
			For more information, see Chapter 8, the section, “Using the
			Auto-Resync Feature” on page 8-5.
N/A	Time (24-hour)	auto resync time	Sets the time of day in a 24-hour period for the IP phone to
			be automatically updated. This parameter works with TFTP,
			FTP, and HTTP servers.
			Notes:
			• The resync time is based on the local time of the IP phone.
			• The value of 00:00 is 12:00 A.M.
			• When selecting a value for this parameter in the Aastra
			Web UI, the values are in 30-minute increments only.
			• When entering a value for this parameter using the config-
			uration files, the value can be entered using minute values
			from 00 to 59 (for example, the auto resync time can be
			entered as 02:56).
			For more information, see Chapter 8, the section, “Using the
			Auto-Resync Feature” on page 8-5.
N/A	Maximum Delay	auto resync max delay	Specifies the maximum time, in minutes, the phone waits
			past the scheduled time before starting a checksync.
			For more information, see Chapter 8, the section, “Using the
			Auto-Resync Feature” on page 8-5.
N/A	Days	auto resync days	Specifies the amount of days that the phone waits between
			checksync operations.
			Note:
			A value of 0 causes the phone to checksync every time the
			clock reads the proper time. A value of 1 forces the phone to
			wait 24 hours prior to doing the first checksync.
			For more information, see Chapter 8, the section, “Using the
			Auto-Resync Feature” on page 8-5.
XML Push Server List (Approved IP Addresses)
N/A	XML Push Server List	xml application post list	The HTTP server that is pushing XML applications to the IP
	(Approved IP Addresses)		phone.

For more information, see Chapter 5, the section, “XML Push

Requests” on page 5-242.

41-001343-02 REV04 – 05.2014 3-50