Aastra Telecom 41-001343-02 manual Alphanumeric Input Order for Username Prompts

Advanced Operational Parameters

RTCP Summary Reports

Parameter –	Configuration Files
sip rtcp summary reports transport protocol	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Specifies the transport protocol used for sending RTCP summary reports. This
	parameter takes effect when at least one line has RTCP summary reports enabled.
	Note:
	The parameter "sip symmetric udp signaling" is effective when the transport protocol for
	RTCP summary reports is set to UDP.
Format	Numeric
Default Value	1	(UDP)
Range	0	(TCP/UDP)
	1	(UDP)
	2	(TCP)
Example	sip rtcp summary reports transport protocol: 2

Alphanumeric Input Order for Username Prompts

Parameter –	Configuration Files
username alphanumeric input order	aastra.cfg, <model>.cfg, <mac>.cfg
Description	When enabled, this parameter changes the default behavior of the keypad input order
	during username prompts from uppercase letters > digit > lowercase letters to digit >
	uppercase letters > lowercase letters.
	For example, when pressing “2” on the keypad during a username prompt with this
	parameter disabled (default) each key press will successively enter the letter/digit A, B,
	C, 2, a, b, c. When enabled, each key press will successively enter 2, A, B, C, a, b, c.
Format	Integer
Default Value	0	(Uppercase letters first
Range	0-1
	0	(Uppercase letters first)
	1	(Digit first)
Example	username alphanumeric input order: 1

A-217 41-001343-02 REV04 – 05.2014