Aastra Telecom 41-001343-02 manual Examples, Top Softkey Parameters

Operational Features

Configuring the BLF/Xfer Key and the Speeddial/Xfer Key Using the Configuration Files

You use the following parameters in the configuration files to configure the BLF/Xfer key and/or Speeddial/Xfer key on the IP Phone.

Softkey Parameters	Programmable Key Parameters	Expansion Module Parameters
softkeyN type	prgkeyN type	expmodN keyN type
softkeyN label	prgkeyN value	expmodN keyN label
softkeyN value	prgkeyN line	expmodN keyN value
softkeyN line		expmodN keyN line
softkeyN states
Top Softkey Parameters
topsoftkeyN type
topsoftkeyN label
topsoftkeyN value
topsoftkeyN line

Examples:

softkey1 type: speeddialxfer

softkey1 label: BX7801

softkey1 value: 7801

softkey1 line: 1

softkey1 states: idle connected incoming outgoing busy

prgkey1 type: blfxfer

prgkey1 value: 35

prgkey1 line: 1

Refer to the following in Appendix A to configure a BLF/Xfer and Speeddial/Xfer key on the IP phone using the configura- tion files.

Configuration Files

To set a BLF/Xfer and Speeddial/Xfer key using the configuration files, see Appendix A, “Softkey/Programmable Key/Keypad Key/Feature Key/Expan- sion Module Key/Hard Key Parameters” on page A-156.

41-001343-02 REV04 – 05.2014 5-141