Aastra Telecom 41-001343-02 SIP Settings, IP Phone UI Aastra Web UI Files PC Port Settings Port

Administrator Level Options

Parameter In	Parameter in	Parameters in Configuration	Description
IP Phone UI	Aastra Web UI	Files

PC Port Settings (Port 1)

PC Port VLAN ID	VLAN ID	vlan id port 1	Allows you to configure a VLAN ID that associates with the
			physical Ethernet Port 1 (PC port).
			For more information, see Chapter 4, “Virtual LAN (optional)”
			on page 4-41.
			Note:
			The PC Port parameters are not applicable to the 6730i IP
			Phone.
PC Port Priority	Priority	qos eth port 1 priority	Specifies the priority value used for passing VLAN packets
			through to a PC via Port 1.
			For more information, see Chapter 4, “Virtual LAN (optional)”
			on page 4-41.

SIP Settings

The following paragraphs describe the SIP parameters you can configure on the IP phone. SIP configuration consists of configuring:

•Basic SIP Authentication Settings

•Basic SIP Network Settings

•Advanced SIP settings

•RTP Settings

•Autodial Settings

Notes:

•Specific parameters are configurable on a global and per-line basis. You can also configure specific parameters using the IP Phone UI, the Aastra Web UI, or the configuration files. If you have a proxy server or have a SIP registrar present at a different location than the PBX server, the SIP parameters may need to be changed.

•The IP phones allow you to define different SIP lines with the same account information (i.e., same user name) but with different registrar and proxy IP addresses. This feature works with Registration, Subscription, and Notify process- ing. This feature also works with the following types of calls: incoming, outgoing, Broadsoft Shared Call Appearance (SCA), Bridged Line Appearance (BLA), conference, transfer, blind transfer.

3-35 41-001343-02 REV04 – 05.2014