Aastra Telecom 41-001343-02 manual Configuring a Server Blacklist Using the Aastra Web UI

Advanced Operational Features

Configuring Blacklist Duration Using the Configuration Files

Use the following parameter to configure the Blacklist Duration in the configuration files:

•sip blacklist duration

Configuration Files

For the specific parameters you can set in the configuration files for setting Blacklist Duration, see Appendix A, the section, “Blacklist Duration Setting” on page A-207.

Configuring a Server Blacklist Using the Aastra Web UI

You use the following procedure to configure Blacklist Duration using the Aastra Web UI.

Aastra Web UI

1.Click on Advanced Settings->Global SIP->Advanced SIP Settings

2.In the “Blacklist Duration” field, specify the length of time, in seconds, that a failed server remains on the server blacklist. The IP phone avoids sending a SIP message to a failed server (if another server is available) for this amount of time. Valid values are 0 to 9999999. Default is 300 seconds (5 minutes).

For example: 600

Note:

The value of “0” disables the blacklist feature.

3.Click Save Settings to save your changes.

6-14 41-001343-02 REV04 – 05.2014