Aastra Telecom 41-001343-02 manual Configuring the Action URI Disconnected Feature

		Operational Features
$$LINESTATE$$ Value	Description	Meaning in a Disconnected URI
CONNECTED	Parties are talking.	Call was successful.
CLEARING	Call was released but not acknowledged.	N/A

The Action URI Disconnect feature allows an Administrator to determine the reason for the disconnect if required.

Note:

If you enable the Action URI Disconnect feature by specifying a URI, the URI is called when any disconnect event occurs including an intercom call or a conference setup.

Example

If you enter the following string on Phone A for the “action uri disconnected” parameter:

action uri disconnected: http://fargo.ana.aastra.com/disconnected.xml?state=$$LINESTATE$$

and then Phone A calls Phone B, Phone B answers and then hangs up, Phone A executes a GET on:

http://fargo.ana.aastra.com/disconnected.xml?state=CONNECTED

which is what the remote server receives.

Note:

If the phone can’t find the Action URI you specify, it returns a “NULL” response. For example,

http://fargo.ana.aastra.com/disconnected.xml?state=

An Administrator can enable the disconnect feature using the configuration files or the Aastra Web UI.

Configuring the Action URI Disconnected Feature

Use the following procedure to configure the Action URI Disconnected feature on the phone.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Action URI Settings” on page A-116.

41-001343-02 REV04 – 05.2014 5-257