Network Settings

Enabling/Disabling DHCP Using the Configuration Files

Use the following procedure to enable/disable DHCP on the phone using the configuration files.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Network Settings” on page A-8.

Enabling/Disabling DHCP Using the IP Phone UI

Use the following procedure to enable/disable DHCP on the phone using the IP Phone UI.

IP Phone UI

1.

Press

on the phone to enter the Options List.

 

2.Select Administrator Menu.

3.Enter your Administrator password.

Note:

The IP Phones accept numeric passwords only.

4.Select Network Settings.

5.Select option DHCP.

6.Press Change to set "Use DHCP?" to "Yes" (enable) or "No" (disable).

7.Press Done to save the changes.

For the 6739i:

1.Press the Options key on the phone to enter the Options List.

2.Press Advanced. A keyboard displays.

3.Enter the Administrator password using the keyboard. Default is “22222”.

4.Press Network.

5.Press DHCP Settings.

6.In the “Use DHCP?” field, select “Enabled” to enable DHCP. or

Press “Disabled” to disable DHCP.

7.

Press the

to return to the previous screen.

 

8.

Press the

button or the

button at any time to return to the idle screen.

 

For the 6867i:

 

 

1.

Press

on the phone to enter the Options List.

 

2.Press the Advanced softkey.

3.Enter the Administrator password using the keypad. Default is “22222”.

4.Select Network > Settings.

5.

In the “Use DHCP?” checkbox, press the

button to enable or disable DHCP.

 

6.Press the Save softkey.

7.

Press the

button, the

button, or the Quit softkey to return to the idle screen.

 

4-4

41-001343-02 REV04 – 05.2014

Page 150
Image 150
Aastra Telecom 41-001343-02 manual Enabling/Disabling Dhcp Using the Configuration Files, Select Administrator Menu