Operational Features

Aastra Web UI

1.Click on Advanced Settings->Action URI.

2.In the “Connected” field, enter a valid URI for which the phone executes a GET on, when it goes into the “connected” state. Leaving this field empty disables the Action URI Connected feature. For example,

http://www.example.com/connect.php

3.Click Save Settings to save your settings.

Action URI Disconnected

The phones have a parameter, “action uri disconnected” that allow a disconnect event to occur when the phone transi- tions from any active state (outgoing, incoming, connected, or calling) to an idle state. This parameter can use the varia- ble “$$LINESTATE$$”.

Note:

The $$LINESTATE$$ variable is optional and not required when enabling the “action uri disconnected” parameter.

If the Administrator enables this feature (by specifying a disconnect URI), when a call is disconnected, the phone checks to see if the event has a Disconnect URI configured. If the phones finds a configured URI with a $$LINESTATE$$ variable, it replaces the $$LINESTATE$$ variable with the appropriate line state of the current active line. After all of the variables are bound, the phone executes a GET on the URI. The following table lists the applicable values for the $$LINESTATE$$ variable.

$$LINESTATE$$ Value

Description

Meaning in a Disconnected URI

IDLE

Phone is idle.

N/A

 

 

 

DIALING

Phone is offhook and ready to dial.

N/A

 

 

 

CALLING

A SIP INVITE was sent but no response was received.

Error occurred during the call.

 

 

 

OUTGOING

Remote party is ringing.

Call was cancelled.

 

 

 

INCOMING

Local phone is ringing.

Call was missed or cancelled.

5-256

41-001343-02 REV04 – 05.2014

Page 496
Image 496
Aastra Telecom 41-001343-02 manual Action URI Disconnected, Phone is idle, Phone is offhook and ready to dial