If the water level in the machine is not suitable when you press Start / Pause button, the display will show that the loading door is locked.
Switching the machine to pause mode:
Press the Start / Pause button to switch the machine to pause mode. The frame around the Start / Pause button starts flashing.
Child Lock |
Enabled |
C "Child Lock Enabled" appears on the display if you press any button when Child Lock is enabled.
| To deactivate the Child Lock: | |
| Press and hold 2nd and 4th Auxiliary Function buttons for 3 | |
| seconds. After the countdown as "Child Lock | |
Changing the programme selection after programme | display is over, "Child Lock Disabled" appears on the display. | |
Child Lock | ||
has started: | ||
The programme change is not allowed when the current | Disabled | |
programme is running. |
| |
If you turn the Programme Selection knob while the |
| |
programme is running, "To Make Changes Switch to |
| |
Standby" appears on the display. |
| |
You can select the new programme after switching the |
| |
current programme to standby. |
|
C The selected program starts anew.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or activate the auxiliary functions; see, "Auxiliary function selection".
You can also change the speed and temperature settings; see, "Spin speed selection" and "Temperature selection".
The loading door will not open if the water temperature C indoortheopening.machine is high or the water level is above the
4.18 Child Lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme.
C You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine again, programme will resume from where it has stopped.
If you press any button when the Child Lock is C activated, the machine will give an audio warning.
After pressing the buttons for 5 times consecutively, audio warning will not be given but the warning on the display will remain active.
To activate the Child Lock:
Press and hold 2nd and 4th Auxiliary Function buttons for 3 seconds. After the countdown as "Child Lock
4.19 Cancelling the programme
The programme is cancelled when the machine is turned off and on again. Press and hold On / Off button for 3 seconds. After the countdown as "Cancel
If you press On / Off button when the Child Lock is C enabled, the programme will not be cancelled. You
should cancel the Child Lock first. Countdown as "Standby
If you want to open the loading door after you have C cancelled the programme but it is not possible to open
the loading door since the water level in the machine is above the loading door opening, then turn the Programme Selection knob to Pump+Spin programme and discharge the water in the machine.
4.20 End of programme
“Laundry can be taken out” appears on the display when the programme is completed.
If you do not press any button for 2 minutes, the machine will switch to standby mode. Display and all indicators are turned off. Only the frame of the Programme Selection knob remains flashing.
If you press any button or turn the Programme Selection knob when the machine is in standby mode, programme steps that are completed will appear on the display.
4.21 Memory (Favourite) program setting
You can create a favourite programme by saving frequently used programme and other settings. Use this function when you want to select quickly the same settings you use for the laundry that you wash regularly.
Favourite programme will remain at the factory set programme until you make a new favourite programme setting.
To store a new favourite programme:
16 / 48 EN | Washing Machine / User’s Manual |
|
|
