SETTINGS

< SOUND SETTING >

2.Turn the Programme Selection knob until the desired sound option appears on the display in Sound Setting menu.

3.If you want to unmute the sound, press the button of the empty box on the lower right corner of the display when "SOUND SETTING ON" is selected. Empty box gets filled and “Sound Set” appears on the display.

4.If you want to mute the sound, press the button of the empty box on the lower right corner of the display when "SOUND SETTING OFF" is selected. Empty box gets filled

and “Turned Off” appears on the display. Restoring the factory settings

When the factory settings are restored:

Display language will return to the first language you selected when you have operated your machine for the first time:

Brightness is set to maximum level,

Sound is unmuted,

Favoutite programme selection is returned to factory settings.

1.Press Temperature Adjustment button and Spin Speed Adjustment button simultaneously for 3 seconds to enter the Settings menu. Press Soiling Degree or Temperature button to open "FACTORY SETTINGS" menu.

SETTINGS

< FACTORY SETTINGS

5 Maintenance and cleaning

Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals.

5.1 Cleaning the detergent drawer

Clean the detergent drawer at regular intervals (every

4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time.

1.Press the dotted point on the siphon in the softener compartment and pull towards you until the compartment is removed from the machine.

If more than normal amount of water and softener C mixture starts to gather in the softener compartment, the

siphon must be cleaned.

2.Wash the detergent drawer and the siphon with plenty of lukewarm water in a washbasin. Wear protective gloves or use an appropriate brush to avoid touching of the residues in the drawer with your skin when cleaning.

3.Insert the drawer back into its place after cleaning and make sure that it is seated well.

5.2 Cleaning the loading door and the drum

Residues of softener, detergent and dirt may accumulate in your machine in time and may cause unpleasant odours and washing complaints. To avoid this, use the Drum Cleaning programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Run the programme without any laundry in the machine. Before starting the programme, put max. 100

g of powder anti-limescale into the main wash detergent compartment (compartment nr. 2). If the anti-limescale is in tablet form, put only one tablet into compartment nr. 2. Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end.

2. To restore factory settings, turn the Programme

 

C Repeat Drum Cleaning process in every 2 months.

Selection knob until "Factory Settings" appears on the

 

display.

 

 

 

C Use an anti-limescale suitable for the washing machines.

 

 

 

 

 

 

 

 

 

 

 

 

FACTORY SETTINGS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After every washing make sure that no foreign substance is left in the drum.

3. Press the button of the empty box on the lower right corner of the display. Factory settings will be restored.

If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.

18 / 48 EN

Washing Machine / User’s Manual

 

 

Page 18
Image 18
Blomberg 8629 wze40 Maintenance and cleaning, Cleaning the detergent drawer, Cleaning the loading door and the drum