MAINTENANCE
Before all cleaning or dismantling operation, it is imperative to:
. disconnect the hob to the mains supply.
. let all parts of the hob cool down.
Never use:
. harsh abrasives, scouring pads or sharp object to clean the hob.
• GENERAL MAINTENANCE
THE HOB
Simply clean the surface using
THE KNOBS
For thorough cleaning, the control knobs can be removed by pulling them upwards. Clean exclusively with soapy water and dry well before replacing them.
THE HOT PLATE
Heat it for a while if necessary, to burn the deposits. After switching off and cooling down of the plate, wipe it with an absorbing paper. In any cases, it is important to protect the hot plate from humidity.
Do not use abrasive products.
To maintain and preserve the appearance, rub a drop of neutral oil, such as sewing machine oil into the surface of the hot plate.
The hot plate should always be dry, or slightly greasy, if it is not to be used for some time. Remove any rust using emery paper followed by a suitable commercially available product.
11